loading

How to choose the size and specification of the drawer rails (what size is the drawer rail for the 3

What size is the 300 deep cabinet drawer slide rail?

How to choose the size and specification of the drawer rails (what size is the drawer rail for the 3 1

Summary

The slide rails of the drawer are fixed on a certain track for the movement of other movable parts of the drawer, with grooved or curved guide rails.

The size of drawer slides is generally available on the market: 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches. You can install different sizes of slides according to the size of your drawer.

Consultation Record · Answered on 2021-10-23

What size is the 300 deep cabinet drawer slide rail?

The slide rails of the drawer are fixed on a certain track for the movement of other moving parts of the drawer, with grooved or curved guide rails. The size of the drawer slide rails is generally available on the market: 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches. You can install different sizes of slide rails according to the size of each drawer model.

How to choose the size and specification of the drawer rails (what size is the drawer rail for the 3 2

It's like no answer

300 deep is 22 inches

It is a 30cm deep wine cabinet with shallow and deep drawers. How long is 22 inches?

The length of 22 inches Hiccup don't know

You try to pretend and show me

we don't have pictures here

About 35CM

Could it be that the exposed track is new?

Then you can choose 18 20

I'm afraid it's too short

Did you immediately check it out online and take it as the answer?

No

It's normal to have a little extra

May I ask how to choose the size of the guide rail of the drawer, what is the meaning of mm and inch? Thank you!

The "inch" here should be "inch", that is, inch, which is a non-international standard unit and belongs to the original unit of length, and millimeter is the current international standard unit. When the two are converted, 1 inch = 25.4 mm.

Because the inch is a fractional system, such as: 1/2 inch, 3/4 inch---- etc., most of them are not integers after conversion, and the purchase should be based on millimeters. For example, a 20-inch guide rail refers to a length of 500 mm, then for the three-section guide rail, it can be pulled out another 500 mm in length, while the two-section guide rail can only be pulled out half the length.

How to design the appropriate drawer size according to the size of the cabinet and choose the appropriate drawer slide rail

What are the size specifications of the drawer guide rails? The drawer guide rails are fixed on a certain track for the movement of other movable parts of the drawer, with grooved or curved guide rails. The size of the drawer guide rails is generally available on the market: 10 inches, 12 inches, 14 inches inch, 16 inch, 18 inch, 20 inch, 22 inch, 24 inch. You can install slide rails of different sizes according to the size of the drawer.

How to choose drawer guide rails, you should first understand some types of guide rails. At present, guide rails can be divided into different types such as two-section guide rails, three-section guide rails, hidden guide rails, etc. These three guide rails can be used for different drawer devices. Of course, these guide rails The role of the drawer is naturally very large. The drawer guide can be said to be the kidney of the drawer, and the load-bearing capacity of the drawer mainly depends on the quality of the drawer guide.

How to install the drawer rails, and how to install the rails purchased according to the size of the drawer rails? This is indeed a problem that consumers are more concerned about. Generally speaking, the installation is divided into several steps. One is to fix the five boards of the drawer first, screw on the screws, and the drawer panel has a card slot; the second is to install the drawer. The slide rail first needs to be disassembled, and the narrow one is installed on the side panel of the drawer, and the wide one is installed on the cabinet body. When installing, the bottom of the slide rail is flat under the side panel of the drawer.

How to buy desk drawer slides? Do you need to measure how long it is?

Just subtract 10 cm from the total length of the drawer.

The size of the drawer slides is generally available on the market: 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches.

Three-section slide rails are generally available in 25, 30, 35, 40, 45, 50, 55, 60, and 65 cm specifications. Two-section slide rails are generally available in 25, 30, 35, 40, 45, and 50 cm specifications. The length of the track should be less than the net depth of the drawer.

The size of drawer slides is generally available on the market: 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches. You can install different sizes of slides according to the size of your drawer.

What are the common sizes of drawer slide rails, how to choose drawer rails

1. Drawer rail size

(1) There are many sizes of drawer rails. The main sizes on the market are 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches, etc.

(2) According to the model of each drawer, choose the slide rail of the corresponding size, mainly suitable, not the larger the size, the better.

2. The installation dimensions of the drawer rails

(1) The conventional size of drawer slides is 250-500 mm, corresponding to 10-20 inches, and the shorter ones are 6 inches and 8 inches, which can be selected according to needs.

(2) Steel ball drawer slides, which can be directly installed on the side panels, or plug-in installed in the grooves of the drawer side panels, the groove height is 17 or 27 mm, and its specifications are 250 mm, 300 mm, 350 mm mm, 400mm, 450mm, 500mm, etc.

3. Other drawer rail dimensions

In addition, there are many special rails, such as frame rails and table ball rails, etc., the lengths are 250 mm, 300 mm, and 350 mm; the thicknesses are 0.8 mm and 1.0 mm.

2. Selection requirements for drawer guide rails

1. Structure

The overall connection of the slide rails should be tight, the load-bearing capacity should be good, the quality of the slide rails should be good, and the hardness should be high.

2. Choose according to your needs

Before purchasing, measure the required length, applicable space, and predict the load-bearing capacity; you can ask the slide rail about its bearing range and push-pull times under load-bearing conditions.

3. Hands-on experience

(1) A good drawer slide rail has relatively small resistance when pulled out; when the slide rail is pulled to the end, the drawer will not fall off or fall over.

(2) Pull out the drawer on site and press it with your hand to see if the drawer is loose and if there is a sound.

(3) Where does the resistance and resilience of the slide rail appear in the process of pulling out the drawer, and whether it is smooth or not, you need to experience it yourself.

Drawer guide rail load-bearing category and size introduction

All drawers will be equipped with drawer rails. Drawer rails can be said to be a tool that allows drawers to be pushed and pulled freely. Drawer rails are generally divided into load-bearing types. Different rails have different load-bearing types. Drawer rails are load-bearing The categories can be divided into five types, which are divided according to different purposes. When choosing drawer guide rails, you need to pay attention to the material. Drawer guide rails are generally made of metal materials, so you should look at its specific gravity when choosing. Now the editor is Share with us the introduction of the load-bearing categories of drawer guide rails.

1. Types of drawer slide rails

1. Bottom-supporting drawer slide rail: The rail is hidden at the bottom of the drawer, durable, no friction, no noise when sliding, and self-closing.

2. Steel ball drawer slide rail: smooth sliding, easy installation, and very durable. The steel ball slide rail is basically a three-section metal slide rail, which can be directly installed on the side plate or plug-in type or inserted into the groove of the drawer side plate Among them, the installation is relatively simple and saves space. Good-quality steel ball slide rails can ensure smooth sliding and large load-bearing capacity. Famous brand products on the market such as Hettich, Hfele, etc. also mainly sell this type of slide rails .The special structure of the rails and precision steel balls ensure the stability. Their specifications are (mm) 250, 300, 350, 400, 450, 500, 550, 600. There are also many special rails, such as frame rails, table ball rails, etc.

3. Roller drawer slides: The structure of the roller slides is relatively simple, consisting of a pulley and two tracks, which can meet the daily push and pull needs, but the bearing capacity is poor, and it does not have the function of buffering and rebounding. It is commonly used in computer keyboard drawers. , light drawer.

4. Wear-resistant nylon slide rails: the most wear-resistant. Nylon slide rails can ensure that the cabinet drawers are smooth and quiet when they are pulled out, and the rebound is soft. Completely made of nylon is relatively rare in the market, while slide rails with some nylon are There are quite a few.

5. According to the length of the slide rail, it can be divided into slide rails of 27cm, 36cm, 45cm and other lengths.

2. Points of attention for purchasing:

Structure and material: Look at the thickness of the metal cross-section of the drawer slide and its structure. Usually, the quality of the drawer slide using a lot of plastic parts is not as good as that of the all-metal slide; specific gravity: usually refers to the weight of the same length or volume unit, This refers to the weight of drawer slides of the same type (such as two rails); surface treatment: this point can be seen with the naked eye. You dont need to listen to too many sales words, you can understand it naturally; applicability: pull Stretch the drawer slide rail to feel the weight, strength, etc. of its pull.

3. What are the dimensions of the drawer rails?

For the guide rails on the market, the size is also an important aspect of purchasing. After all, whether the size is suitable is related to the installation of the entire drawer. So what are the sizes of this good product? The drawer guide rail sizes are generally available on the market: 10 inches, 12 inches inch, 14 inch, 16 inch, 18 inch, 20 inch, 22 inch, 24 inch. You can install slide rails of different sizes according to the size of each drawer model. Of course, the bigger the size, the better.

The above is the load-bearing side of the drawer guide introduced by the editor. The weight category of the drawer guide is calculated according to the size of the drawer, and is also divided according to the weight of the drawer. The weight and specifications of different drawers are different, so different The load-bearing categories of the guide rails used in the drawer are also different. The drawer guide rails can generally be replaced. When there is a problem with our drawer guide rails, we can go to the hardware store to buy the guide rails for replacement. When replacing, be careful not to damage the drawer .

What is the size of the drawer slides?

The conventional size of the drawer slide rail is: 250mm-500mm (10 inches-20 inches), and the shorter ones are 6 inches and 8 inches.

Slide rails, also known as guide rails and slideways, refer to hardware connection parts fixed on the cabinet body of furniture for the drawers or cabinet boards of furniture to enter and exit. Slide rails are suitable for wooden and Drawer connections for furniture such as steel drawers.

Extended information:

Key points for slide rail selection:

1. Test steel

How much the drawer can bear mainly depends on whether the steel of the track is good or not. Drawers of different specifications have different thicknesses of steel and different load-bearing. When purchasing, you can pull out the drawer and press it with your hands to see if it will loosen and slam. Crank or flip.

2. Look at the materials

The material of the pulley determines the comfort when the drawer slides. Plastic pulleys, steel balls, and wear-resistant nylon are the three most common pulley materials. Among them, wear-resistant nylon is the top grade. When sliding, it is quiet and silent. Depending on the quality of the pulley, you can use a Push and pull the drawer with your fingers, there should be no harshness and no noise.

3. Pressure device

Choose key points to see if the pressure device is easy to use, just try more! See if it saves effort and whether it is convenient to brake. But it should be noted that although the pressure device is very good, it is more expensive.

References:

slide rail

What are the sizes of the drawers, and what are the precautions for the installation of the drawer slide rails?

What are the dimensions of the drawers, and what precautions should be taken when installing the drawer slide rails?

Drawers should be very familiar in our daily life. The application of drawers brings convenience to their living and home furnishing. It can be seen in TV cabinets, wardrobes, sprinkler cabinets, dining cabinets and other furniture. If the drawers are normal Activities are inseparable from the help of drawer slides, so how much is the size of drawer slides, how should drawer slides be installed, drawer installation, precautions for using drawer slides.

1. How to install the drawer

1. At present, the common drawer slide rail is a three-section built-in slide rail. Before installation, it is necessary to measure the relevant data information, clarify the length and depth of the drawer, and select the corresponding slide rail for installation.

2. After the slide rails are installed, the drawer board is then assembled. The drawer is generally composed of five woodworking boards. They are a side board, a upper and lower side board, a drawer control panel, and a metal sheet. The five boards need to be fixed with screws. After fixing, the drawer needs to be blocked on the installed slide rail, and the position of the drawer and the seam should be adjusted to meet the conditions.

3. After the slide rail and the drawer are adjusted to basically meet the conditions, it is necessary to point the top of the movable rail in the side panel of the drawer to the top of the fixed rail, and then gently push the drawer inward. When you hear a click, It means that the connection between the movable rail and the fixed rail is completed, and the drawer can be driven freely.

2. Size of drawer slide rail

At present, the size of the common slide rails on the market is between 250mm and 500mm, that is, between 10 inches and 20 inches, and the size of the shorter slide rails is also 6 inches and 8 inches. If it exceeds 500mm, that is, above 20 inches, almost All need to be customized.

3. Matters needing attention in the use of drawer slide rails

1. If you find that the drawer is uneven, you can first check whether the installation holes on both sides of the drawer are consistent, and then check whether the direction of the drawer is 90 degrees.

2. If the drawer cannot be pulled out or the drive is not smooth, it means that there is not enough space left during installation. Loosen the space of the drawer by 1-2 mm to deal with this situation.

3. If the left and right drawer slide rails are installed with the same size, but cannot be exchanged, it means that the two drawers are installed in different positions.

4. If the drawer is derailed when dragged, it means that the size of the installation is too large. At this moment, the size of the installation can be appropriately reduced.

Desk drawer size details Drawer slide size and specifications

You must have seen drawers in your daily life! So, do you have a certain understanding of the size of the drawer? Today I will introduce the size of the drawer to you. Drawers are used in our daily life, such as cabinets or desks. Use a box to put things. It helps us store things and saves us a certain amount of space. It can be pushed in and then pulled out. The size of the drawer is determined according to the size of our desk. Next, the editor will take everyone together Take a look at the dimensions of the desk drawers.

1. Desk drawer size details:

There is no specified size for the width of the drawer. It is divided according to the actual size. Generally, the minimum should not be less than 20 cm, and the maximum should not be greater than 70 cm. The depth is based on the length of the guide rail. The guide rails are 20 cm, 25 cm, 30 cm, 35, 40, 45, 50 cm, etc.

After looking at the size of the drawer, have you not noticed the slide rail on the side of the drawer? What I want to tell you is that the reason why the drawer can be called a drawer and can be pulled out and pushed in is because there is a part called a slide Rail, then Xiaobian will introduce the slide rail! The combination of the slide rail and the drawer can exert its maximum effect, so be sure to read it carefully!

2. Dimensions and specifications of drawer slide rails

The slide rail of the drawer is fixed on a certain track for the movement of other movable parts of the drawer, with grooved or curved guide rails.

The size of the drawer slide rails is generally available on the market: 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches. You can install slide rails of different sizes according to the size of the drawer.

1. Fix the five boards of the drawer first, and screw on the screws. The drawer panel has card slots, and there are two small holes in the middle for installing the handle.

2. To install the drawer slide rails, you first need to disassemble the rails. The narrow ones are installed on the drawer side panels, and the wide ones are installed on the cabinet body. To distinguish before and after.

3. Install the cabinet body. Screw the white plastic hole on the side panel of the cabinet body first, and then install the wide track removed from above. One slide rail is fixed with two small screws one at a time. Both sides of the body must be installed and fixed.

The above is the relevant content about the size of the desk drawer and the size and specifications of the drawer slide rails introduced in detail by the editor. How about it? After reading the introduction of the editor, I also have a certain understanding of the size of the drawer and the slide rails. Well, the desk is a piece of furniture that we often see in our homes. It is used very frequently, so the functions of the desk drawer as storage and storage are more important. Here, I would like to remind everyone that if you want to buy Friends of the desk, you must see the brand and quality clearly, and choose carefully. The introduction of the editor is over here, and I hope it can help everyone.

GET IN TOUCH WITH Us
recommended articles
Blog Resource Catalogue Download
A good drawer slide should require no more than some basic tools and a few minutes of your time to install. Removing the drawer should be even easier, so you can easily inspect all the contents and add/ remove stuff as you wish.
In today’s step-by-step guide, we’ll show you how to bypass all potential headaches and choose the right size drawer slide in 5 easy steps! So without further ado, let's get started.
Whether it is center drawer slidesor kitchen drawer slides, you should consider the various factors determining which drawer slides will be the right ones for you.
no data
We are continually striving only for achieving the customers' value
Solution
Address
TALLSEN Innovation and Technology Industrial, Jinwan SouthRoad, ZhaoqingCity, Guangdong Provice, P. R. China
Customer service
detect