Stainless Steel Silver Cabinet Door Handle

Use the template provided in the door handle kit to mark where you will be drilling. Line the template up with the mark you've made for the height of the door handle. Mark on the template where you will drill holes in the side and front of the door. Repeat this process to mark where you will drill on the other side of the door.

Use a 2mm drill bit to drill pilot holes in the door where you marked on the front, back and side of the door, using the template. Before you drill, make sure you are square to the door. Don't drill right through the door as this might cause the wood on the opposite side to splinter. 

Before starting this next step, read the instructions in the door handle kit, every kit may be slightly different.  After drilling the pilot holes, insert a larger drill bit in the cordless drill.  Use this to make all of the pilot holes on the front, back and side of the door larger. Don't let the drill bit go through the other side of the door because it can make the wood splinter.

Attach the 25mm spade bit to the cordless drill. Make sure the door is properly wedged and won't move, drill the spade bit into the centre hole on the front of the door. Repeat this drilling process on the other side of the door. These holes are where the spindle for the door handle will be inserted.