Cabinet door hinge installation video 2

Spring hinges are special hinges that are installed on spring doors or cabinet doors to automatically close the door after it is opened. They are equipped with a spring and an adjusting screw, allowing for height and thickness adjustments. There are single spring hinges that open in one direction and double spring hinges that open in both directions. In this article, we will discuss the selection, installation method, and precautions of spring hinges.

1. Selecting Spring Hinges:

When selecting spring hinges, it is important to ensure that they match the door and window frame and leaf. Check if the hinge groove matches the height, width, and thickness of the hinge. Also, verify if the hinge and the screws and fasteners connected to it are compatible. The method of connecting the spring hinge should be suitable for the material of the frame and leaf. For example, for a steel frame wooden door, the side connected to the steel frame should be welded, while the side connected to the wooden door leaf should be fixed with wood screws. It is essential to identify which leaf board should be connected to the fan and which one should be connected to the door and window frame. The shafts of the hinges on the same leaf should be on the same vertical line to prevent the door and window leaf from springing up.

Cabinet door hinge installation video
2 1

2. Installation Method:

Before installing a spring hinge, determine if the door type is a flat door or a rebated door, and consider the door frame material, shape, and installation direction. Follow these steps for installation:

- Insert a 4mm hexagonal key into the hole at one end of the hinge and open the hinge.

- Install the hinges into the hollowed-out grooves on the door leaf and door frame using screws.

- Close the door leaf and make sure the spring hinges are in the closed state. Insert the hexagonal key again, turn it clockwise to rotate, and hear the sound of the gears meshing. Do not exceed four rotations, as it may damage the spring's elasticity when the door leaf is opened.

Cabinet door hinge installation video
2 2

- Tighten the hinge, ensuring that the opening angle does not exceed 180 degrees.

- To loosen the hinge, repeat the same operation as step 1.

By following these steps, the spring hinge can be installed properly and provide a more reliable and stable operational effect.

Expanding the

Cabinet hinges are another important element to consider during installation. Here's a detailed guide on how to install cabinet hinges:

1. Measure and Mark:

Measure the size and edges of the cabinet door accurately and mark them properly. This step is crucial to ensure the correct placement of the hinges for smooth operation.

2. Drill Holes:

Drill holes on the door panel according to the marked measurements. The depth of the holes should not exceed 12mm. Careful drilling will prevent any damage to the door panel.

3. Insert Hinges:

Place the hinge into the hinge cup and position it on the door panel hole of the cabinet. Use screws to secure the hinge in place. Ensure that the hinges fit properly into the cup and are tightly fixed.

4. Check Functionality:

Close the cabinet door and check if the hinge functions correctly. The door should open and close smoothly without any resistance or noise. If there are any issues, make the necessary adjustments to achieve optimal functionality.


1. Avoid Sharing Hinges:

To maintain stability, it is best to avoid situations where multiple hinges share the same side panel. If unavoidable, leave enough spacing while drilling to prevent multiple hinges from being fixed at the same position.

2. Tightening Loose Hinges:

If the cabinet door becomes loose over time, it can be easily fixed. Loosen the screw that fixes the hinge base using a screwdriver. Slide the hinge arm to the correct position and then tighten the screws again. This simple adjustment will restore stability to the cabinet door.

3. Determining Margins:

When installing cabinet hinges, determine the size of the cabinet door and the minimum margin required between the doors. The minimum margin value can be found in the cabinet hinge installation instructions. It is important to follow these guidelines for proper installation and functionality.

By following the steps and precautions outlined in this article, the selection and installation of spring hinges and cabinet hinges can be done effectively. Spring hinges provide automatic closure, while cabinet hinges ensure smooth operation and stability. Careful consideration of the door and frame material, accurate measurements, and proper alignment will result in successful installations.

recommended articles
Blog Resource Catalogue Download
no data
We are continually striving only for achieving the customers' value
TALLSEN Innovation and Technology Industrial, Jinwan SouthRoad, ZhaoqingCity, Guangdong Provice, P. R. China
Customer service