Drawer slide rail disassembly diagram (how to remove the drawer rail

How to Remove the Drawer Track: A Step-by-Step Guide

Removing a drawer track may be necessary for repairs, replacements, or renovations. Here is a step-by-step guide on how to remove the drawer track safely and efficiently.

Step 1: Prepare the Drawer Tracks

Before starting the removal process, it is important to prepare the drawer tracks. Take a close look at the drawer and identify the tracks that need to be removed.

Step 2: Pull the Drawer Track to the End

Once you have identified the tracks to be removed, pull the drawer track to the end. Gently exert pressure on the track and slide it all the way out.

Step 3: Locate the Black Button

After pulling the drawer track to the end, you will notice a black button located in a red box. This button is usually visible on the side of the track.

Step 4: Pinch the Black Button

Using your fingers, pinch and hold down the black button firmly. Apply gentle pressure to release the mechanism that holds the track in place.

Step 5: Disassemble the Drawer Track

After pinching the black button, you can easily disassemble the drawer track from its position. Carefully separate the track from the drawer or cabinet, ensuring not to damage any surrounding components.

Removing the Slideway Used on the Computer Desk Keyboard Board

To disassemble the slideway used on a computer desk keyboard board, it is best to have a diagram that illustrates the specific steps. However, here is a general overview of the process:

Step 1: Firmly Press Down the Plastic Bullets

If your computer desk has a keyboard board with a slideway, start by firmly pressing down the plastic bullets on both sides of the slideway. Ensure that you hear a crisp sound when pressing them, as this indicates that the slide rail is ready to be opened.

Step 2: Remove the Slide Rails

Once the plastic bullets are pressed down, you can proceed to remove the slide rails. Pull the slide rail outwards from the keyboard board, ensuring that it is fully disengaged.

Step 3: Install the Slide Rails

To reinstall the slide rails, position them on both sides of the keyboard board. Make sure they align with the pre-drilled holes or mounting slots. Secure the slide rails in place using small pointed screws.

Step 4: Clean the Countertop

After the slide rails are installed, clean any stains or debris from the countertop using a rag and water. Ensure that the area is free from dirt or dust before using the keyboard board.

Precautions during the Disassembly Process of Office Computer Desk Drawer Slide Rail

During the process