How many centimeters should be left on both sides of the drawer to install the track (the distance r

The distance required for the installation of drawer slide rails is usually much shorter than the depth of the drawer itself. Typically, the distance between the drawer and the side panel is around 10mm, which means that the drawer is 20mm narrower than the side panels on both sides. This allows for smooth movement of the drawer without any obstructions.

The length of the track needed for a drawer is determined by the depth of the drawer. Usually, the length of the track is about 50mm shorter than the depth of the cabinet barrel. For example, if the drawer is 70mm deep, then a track that is 65mm long would be suitable.

When it comes to the sizes and specifications of drawer slide rails, there are a few options available. Three-section slide rails can be found in specifications ranging from 25cm to 65cm, while two-section slide rails are available in sizes from 25cm to 50cm. It is important to choose a track length that is less than 5cm shorter than the net depth of the drawer.

Installing drawer slide rails is an important part of assembling drawers. These slide rails, also known as guide rails or slideways