How to repair the broken hinge of the cabinet door (how to repair the broken hinge of the wardrobe d2

To repair a wardrobe door hinge that has fallen off, follow these steps:

1. Remove the broken hinge: Unscrew the screws on the hinge using a Phillips screwdriver. Take off the broken hinge from the door and the wardrobe.

2. Clean the area: Use a damp cloth to clean any dirt or debris from the area where the hinge was attached. This will ensure a clean and sturdy installation.

3. Choose a new hinge position: Instead of reinstalling the hinge in the original position, consider changing the high or low point. This will provide a better fit and prevent the hinge from falling off again.

4. Adjust the hinge screws: Use the Phillips screwdriver to adjust the screws at different parts of the hinge. This will allow for hinge adjustments that can align the door properly.

- If the door closes loosely, adjust the screw at the bottom of the hinge to push the door forward.

- If there is a gap in the upper part of the door after closing, adjust the screw on the right side of the hinge to make the lower end of the door tilt inward.

- If the door protrudes outward after closing, adjust the first screw of the hinge to make the door protrude outward. Use the screw on the left side to fix it in place.

5. Install the new hinge: Place the new hinge in the desired position on the door and the wardrobe. Align the screw holes and attach the hinge using the provided screws.

6. Check the door movement: Open and close the door to ensure that it opens and closes smoothly without any issues. Make any additional adjustments if necessary.

Extended Information:

When selecting a cabinet hinge, consider the following key points:

1. Material: Look for hinges made of cold-rolled steel, as they are durable and have a strong load-bearing capacity. They should also have a smooth surface and a thick coating to resist rust. Avoid inferior hinges made of thin iron sheets, as they can lose their elasticity and eventually cause the door to not close tightly.

2. Hand feel: High-quality hinges should have a soft opening force and a uniform rebound force when closed partially. This indicates their durability and convenience of use. Inferior hinges may have a short service life, fall off easily, and have poor overall quality.

To repair the connection between the cabinet door and the hinge, follow these steps:

1. Open the door and lift it up while holding onto it. This might require some effort, but it will allow you to lift the door out of its hinges.

2. Clean the rusted area using anti-rust oil and lubricating oil. Apply the oils to remove any rust build-up and improve the door's movement.

3. Screw off the old hinge and replace it with a new one. Secure the new hinge using screws and tighten them to ensure a secure connection.

Remember to choose a hinge that matches the original hinge's style and size to maintain consistency and proper functionality.