Step 1. Mark the Placement of the SlidesMeasuring from the inside floor of the cabinet, mark a height of 8¼ inches near the front and back of each side wall. Using the marks and a straightedge, draw a level line across the wall on each inside wall of the cabinet. Make a mark on each line that’s 7/8 inch from the front edge of the cabinet. This allows room for the thickness of the drawer front plus an 1/8-inch inset.


Step 2. Position the SlidesAlign the bottom edge of the first slide above the line, as shown. Position the front edge of the slide behind the mark near the face of the cabinet.


Step 3. Install the SlidesHolding the slide firmly in place, push the extension forward until both sets of screw holes are visible. Using a drill/driver, drill shallow pilot holes in one screw hole near the front and back of the slide. Using the screws provided, mount the slide to the inside of the cabinet. Repeat steps 2 and 3 to mount the second drawer slide on the opposite side of the cabinet.

Step 4. Mark the Drawer SidesUsing a tape measure, mark the center of the height of the drawer box on its outer side walls. (Note: this drawer is shown without the drawer face, which will be installed at the end of this tutorial.) Using a straightedge, mark a horizontal line along the outside of the drawer box on each side.


Step 5. Position the Slide ExtensionRemove the detachable section of each drawer slides, and place it on the corresponding drawer side. Position the slides so that they are centered on their corresponding line and flush with the face of the drawer box, as shown.


Step 6. Attach the Slides to the DrawerUsing a drill/driver and the screws provided with the drawer slides, mount the slide to the drawer.

Step 7. Insert the DrawerHold the drawer level in front of the cabinet. Place the ends of the slides attached to the drawers into the tracks inside the cabinet. Pressing evenly on each side of the drawer, slide the drawer into place. The first slide inward can sometimes push a bit tougher, but once the tracks are engaged, the drawer should slide back out and in smoothly.

Step 8. Position the Drawer FaceApply wood glue to the face of the drawer box. With the drawer closed, position the drawer face with equal gaps along the top and side edges. Using clamps, secure the drawer face against the drawer box.

Step 9. Attach the Drawer FaceCarefully slide the drawer open, and then drive 1-inch screws through the holes in the drawer box and into the backside of the drawer face to secure it in place.

Drawer slides may seem like an insignificant part of your furniture, but they play a crucial role in providing smooth and effortless drawer operation. The right type of drawer slide can make all the difference when it comes to the durability, stability, and functionality of your drawers. This article aims to provide an overview of the different types of drawer slides available in the market, their advantages and disadvantages, and the factors to consider when choosing the right type of drawer slide for your application.




Types of Drawer Slides：


1-Ball-Bearing Drawer Slides

Ball-bearing drawer slides are the most popular and widely used type of drawer slides. These slides are composed of a set of ball bearings that ride in a track, providing smooth and stable operation. They are easy to install and can support heavy loads. Ball-bearing drawer slides come in a variety of sizes and are available in full-extension, partial-extension, and over-travel options.




Advantages: The main advantage of ball-bearing drawer slides is their smooth and effortless operation. They also offer excellent weight-bearing capacity and are easy to install.
Disadvantages: The main disadvantage of ball-bearing drawer slides is their cost, as they are more expensive than other types of slides.
Applications: Ball-bearing drawer slides are commonly used in kitchens, bedrooms, and office furniture.



2-Heavy Duty Drawer Slides

Heavy-duty drawer slides are designed to support heavier loads than ball-bearing drawer slides. These slides are commonly used in industrial and commercial applications where the drawers need to withstand constant heavy use. Heavy-duty drawer slides are available in a variety of lengths and weight-bearing capacities.






Advantages: The main advantage of heavy-duty drawer slides is their high weight-bearing capacity and durability. They are also resistant to wear and tear, making them ideal for industrial and commercial use.
Disadvantages: Heavy-duty drawer slides can be expensive, and they may not be suitable for applications that require frequent opening and closing.
Applications: Heavy-duty drawer slides are commonly used in industrial and commercial applications such as tool cabinets, storage units, and heavy-duty filing cabinets.



3-Undermount Drawer Slides

Undermount drawer slides are a newer type of drawer slide that is gaining popularity due to their sleek and modern design. These slides are installed under the drawer, providing a clean and unobtrusive look. Undermount drawer slides are available in full-extension and soft-close options.








Advantages: The advantage of under-mount drawer slides is their sleek and modern design, which provides a clean and unobtrusive look. They also offer excellent weight-bearing capacity and smooth and quiet operation.
Disadvantages: The disadvantage of under-mount drawer slides is their cost, as they are more expensive than other types of slides.
Applications: Undermount drawer slides are commonly used in high-end kitchens, bathrooms, and office furniture.



4-Center-Mount Drawer Slides

Center-mount drawer slides are an older type of drawer slide that is still used in some furniture applications. These slides are installed in the center of the drawer, providing stability and preventing the drawer from tipping. Center-mount drawer slides are available in partial-extension and full-extension options.


Advantages: The main advantage of center-mount drawer slides is their stability, which prevents the drawer from tipping. They are also easy to install and maintain.
Disadvantages: their disadvantage is their limited weight-bearing capacity, which makes them unsuitable for heavy-duty applications.
Applications: Center-mount drawer slides are commonly used in light-duty applications such as bedroom furniture and dressers.



How to Choose the Right Drawer Slide?
Choosing the right drawer slide is crucial to ensure that your drawers operate smoothly and efficiently. Here are some factors to consider when selecting a drawer slide:

1-Choosing the Right Drawer Slide: Why Load Capacity Matters

The load capacity of the drawer slide is one of the most important factors to consider. The slide must be able to support the weight of the drawer and its contents. For heavy items, a heavy-duty slide is required, while for lighter items, a standard slide will suffice. It's always better to choose a slide that is rated for a higher weight capacity than you think you'll need, to ensure durability and stability.

2-Why Accurate Measurements are Essential

The length of the drawer slide should match the length of the drawer. A slide that is too short will not allow the drawer to extend fully, while a slide that is too long will be unstable and may bend or break under the weight of the drawer. Therefore, it's essential to measure the drawer accurately and choose a slide that is proportional to its length.

3-Choose the Right Extension Type for Your Drawer Slide

The extension of the drawer slide should match the depth of the drawer, allowing for full access to the contents. The most common types of extensions are 3/4, full, and over-extension. A 3/4 extension slide allows the drawer to extend three-quarters of its depth, while a full extension slide allows the drawer to extend fully. An over-extension slide allows the drawer to extend beyond its full length, providing access to the back of the drawer.

4-Side Mount, Center Mount, and Undermount Options

There are three main types of mounting: side mount, center mount, and under mount. Side mount slides are mounted on the sides of the cabinet and the sides of the drawer. Center mount slides are mounted on the center of the drawer and the center of the cabinet. Undermount slides are mounted on the underside of the drawer and the sides of the cabinet. It's essential to choose a slide that is compatible with the construction of your cabinet and drawer.

5-Durability for Frequent Use and Heavy Loads

The durability of the drawer slide should be considered based on the frequency of use and the weight of the drawer and its contents. A drawer that is frequently used and carries heavy items requires a durable and stable slide. It's always better to invest in high-quality drawer slides that are designed to withstand wear and tear, rather than opting for low-quality slides that may break down quickly and require frequent replacement.

6-Consider the Cost of Drawer Slides

The cost of the drawer slide should be considered based on the desired level of quality and functionality. While high-quality drawer slides may be more expensive, they offer better performance, durability, and stability, which can save you money in the long run. Low-quality slides may be less expensive initially, but they may break down quickly, requiring frequent replacement and maintenance


Discover Smooth and Durable Drawer Slides at Tallsen
At Tallsen, we offer a wide range of high-quality drawer slides, including under-mount drawer slides, ball-bearing drawer slides, and heavy-duty drawer slides. Our drawer slides are designed with the latest technology to provide smooth and effortless drawer operation, durability, and stability. We are committed to putting people first and providing flexible and reliable solutions that meet our customers' unique needs. With our expertise and experience, we can help you choose the right type of drawer slide for your application and provide personalized solutions that meet your specific requirements.





Summary
In conclusion, choosing the right type of drawer slide is essential for ensuring smooth and effortless drawer operation. Ball-bearing drawer slides, heavy-duty drawer slides, undermount drawer slides, and center-mount drawer slides are the main types of drawer slides available in the market, each with its advantages and disadvantages. When choosing the right drawer slide for your application, it is important to consider factors such as load capacity, length, extension, mounting, durability, and budget.

As the world continues to evolve, the design and functionality of furniture are also rapidly changing. One of the recent trends in home furnishing hardware is the use of under-mount drawer slides. Undermount drawer slides are hardware components that are installed beneath the drawers in cabinets or furniture. They provide support and allow drawers to slide smoothly in and out of the cabinet without adding to the overall dimensions of the furniture.

In this article, we will explore the trend of using under-mount drawer slides, its advantages, and challenges, and the future outlook and opportunities in this market.



Uses of Undermount Drawer Slides
Undermount drawer slides are primarily used in cabinetry and furniture where the emphasis is on smooth operation, improved aesthetics, and increased storage space. They are commonly used in kitchen and bathroom cabinets, dressers, wardrobes, and office furniture.





Advantages of Using Undermount Drawer Slides
1-Better appearance

The under-mount drawer slide is a popular choice among homeowners and designers because of its sleek and clean appearance. Unlike traditional side-mounted drawer slides, undermount slides are hidden from view, giving cabinets and furniture a more polished and streamlined look. One of the most popular Metal Drawer Systems is from Tallsen. These metal drawer systems provide a modern look and are very appealing to younger homeowners.



2-Easy to install

Undermount drawer slides are easy to install and require minimal tools and expertise. They are designed to be installed quickly and easily, even by non-professionals.



3-Increased storage space

Undermount drawer slides are designed to be installed beneath the drawers, which means that they do not take up any additional space in the cabinet. This design allows for more storage space within the cabinet, making it easier to store larger items.



4-Smooth and quiet operation

Undermount drawer slides provide a smooth and quiet operation. The Tallsen Quiet Slide, for example, uses high-quality materials to ensure smooth and silent drawer operation. This feature is especially important in areas like bedrooms and offices, where quiet operation is crucial.



5-Improved accessibility

Undermount drawer slides allow for easier access to the contents of the cabinet or drawer. The smooth operation and full extension feature of under-mount drawer slides make it easier to reach items stored at the back of the drawer.



Factors Driving the Trend
1. Demographic shift towards younger homeowners: Younger homeowners are more likely to invest in modern, sleek, and functional furniture. Undermount drawer slides are becoming increasingly popular among this demographic because they provide a minimalist and clean look, which is highly valued by younger homeowners.



2. Technological advancements: The advancements in technology have allowed for the development of new and improved under-mount drawer slides that offer better functionality, durability, and aesthetic appeal. These technological advancements have made under-mount drawer slides more popular and accessible.



3. Increased focus on kitchen and bathroom renovations: Kitchen and bathroom renovations are becoming more popular as homeowners seek to improve the functionality and aesthetics of their homes. Undermount drawer slides are an essential component in the design of modern kitchen and bathroom cabinets, which is driving the trend toward their use.



4. Desire for high-quality materials and finishes: Homeowners are increasingly interested in high-quality materials and finishes for their furniture. Undermount drawer slides are made with high-quality materials, such as stainless steel, that provide durability and longevity.





Undermount Drawer Slides Challenges and Limitations
1-Higher cost compared to other drawer slide types: One of the main challenges of under-mount drawer slides is their higher cost compared to other types of drawer slides. This is due in part to the complexity of the manufacturing process, which requires precision engineering and high-quality materials. As a result, under-mount drawer slides are generally more expensive than traditional side-mounted drawer slides.



2-Compatibility issues with certain types of cabinetry: Another potential challenge of under-mount drawer slides is their compatibility with certain types of cabinetry. For example, some types of cabinets may not have enough space to accommodate the larger profile of under-mount drawer slides. In addition, certain types of cabinetry materials, such as particleboard or MDF, may not be strong enough to support the weight of heavy items stored in the drawers.



3-Maintenance requirements: Undermount drawer slides require regular maintenance to ensure optimal performance. Over time, dust and debris can accumulate in the track, which can cause the drawer to stick or become difficult to open and close. To prevent this, users should periodically clean the tracks and lubricate the rollers with a silicone-based lubricant.



4-Limited weight capacity: Undermount drawer slides typically have a lower weight capacity than other types of drawer slides, which can limit their use in certain applications. For example, they may not be suitable for storing heavy pots and pans in a kitchen cabinet.



Future Outlook and Opportunities For Undermount Drawer Slides
Despite these challenges, the trend toward under-mount drawer slides is likely to continue in the coming years. As homeowners become more focused on high-quality materials and finishes, under-mount drawer slides offer a sleek and modern look that is unmatched by traditional side-mounted drawer slides. In addition, advancements in manufacturing technology are likely to lead to further improvements in design, functionality, and cost-effectiveness.



There is still plenty of room for growth in the under-mount drawer slide market. As more homeowners become aware of the benefits of under-mount drawer slides, demand for these products is likely to increase. In addition, there is potential for under-mount drawer slides to expand into new application areas, such as office furniture and commercial storage systems.



Summary
In conclusion, the trend toward under-mount drawer slides is driven by a variety of factors, including advancements in manufacturing technology, the growing popularity of minimalist and modern design aesthetics, and a desire for high-quality materials and finishes. While there are some challenges and limitations associated with under mount drawer slides, such as their higher cost and compatibility issues with certain types of cabinetry, these products offer many benefits, including increased storage space, improved accessibility, and a sleek and modern appearance.



As a leading provider of home furnishing hardware, Tallsen Hardware is a leading manufacturer of under-mount drawer slides and other home furnishing hardware, with a focus on quality, innovation, and sustainability. Our Metal Drawer System product series is a prime example of our commitment to developing new and improved materials and technologies, and we are excited to continue meeting the growing demand for under-mount drawer slides in the years to come.



Industry professionals and consumers alike can benefit from the trend towards under-mount drawer slides by staying informed about the latest innovations and developments in the market, and by working with trusted manufacturers who prioritize quality and sustainability in their products. With the right resources and knowledge, under-mount drawer slides can be a valuable addition to any home or project, providing improved functionality and a sleek, modern look that will stand the test of time.

Undermount and bottom mount drawer slides are two distinct types of slides that offer unique features and applications. While both serve the purpose of facilitating smooth drawer operation, they differ in their design and installation methods.

In this article, we will delve into the differences between undermount and bottom mount drawer slides, explore their specific applications, and showcase the exceptional products offered by TALLSEN, a reputable provider of high-quality drawer slides.



Undermount vs Bottom Mount Drawer Slides: What are the key differences?
1-Mounting Location:

Undermount Slides: Undermount slides are installed underneath the drawer, attached to the sides of the drawer box. This installation method creates a clean and seamless look since the slides remain hidden from view when the drawer is closed. It allows for a sleek design and can be particularly desirable for modern or minimalist styles.

Bottom Mount Slides: Bottom mount slides are mounted on the bottom of the drawer box and attached to the cabinet or furniture structure at the bottom. The slides are visible when the drawer is open, which may be a consideration for the overall aesthetics of the piece.



2-Visibility:

Undermount Slides: With undermount slides, the hardware is concealed, providing an unobstructed view of the drawer face when it is closed. This contributes to a clean and streamlined appearance, without any visible hardware. It can create a more polished and modern look for furniture or cabinetry.

Bottom Mount Slides: Bottom mount slides are visible when the drawer is open since the hardware is located on the bottom side. The slides and brackets may be exposed, which could be a consideration if the appearance of the hardware is important to the overall design.



3-Drawer Clearance:

Undermount Slides: Undermount slides offer full access to the interior of the drawer. Since they are mounted underneath the drawer box, there are no obstructions that reduce the usable space. This design allows for maximum storage capacity and easy access to the entire drawer, making it convenient to organize and retrieve items.

Bottom Mount Slides: Bottom mount slides may reduce the usable space within the drawer to some extent. The slides are typically installed on the bottom edges of the drawer, occupying a small portion of the space. While this reduction may be minimal, it is worth considering when planning the dimensions and capacity of the drawer.



4-Weight Capacity and Stability:

Undermount Slides: Undermount slides are known for their strength and weight-bearing capacity. They are generally designed to support heavier loads and provide stability during use. This makes them suitable for drawers that will hold substantial items or experience frequent and heavy use. The design of undermount slides typically includes features such as ball bearings or soft-close mechanisms for smooth and quiet operation.

Bottom Mount Slides: Bottom mount slides typically have a lower weight capacity compared to undermount slides. They are generally better suited for drawers that will hold lighter items. While bottom mount slides can still provide adequate support for everyday use, they may not be as robust or stable as undermount slides when subjected to heavier loads.



5-Installation Complexity:

Undermount Slides: Installing undermount slides can be more complex compared to bottom mount slides. They require precise measurements, alignment, and mounting to ensure proper functionality. Undermount slides often come with specific installation instructions and may require additional adjustments to achieve optimal performance. It is important to carefully follow the manufacturer's guidelines to ensure the slides are properly installed and aligned.

Bottom Mount Slides: Bottom mount slides are generally easier to install since they are mounted on the bottom of the drawer box. The process typically involves attaching the slides to the drawer and cabinet or furniture structure. While proper alignment is still important, the installation of bottom mount slides is generally more straightforward compared to undermount slides. They may be a more accessible option for DIY projects or installations with limited woodworking experience.



Undermount vs Bottom Mount Drawer Slides Applications
Undermount drawer slides are commonly used in modern and contemporary furniture designs. They are ideal for applications where a sleek, seamless look is desired, such as in kitchen cabinets, bathroom vanities, or bedroom dressers. Undermount slides are often chosen for high-end cabinetry and custom furniture projects where aesthetics and smooth operation are top priorities.

While bottom-mount drawer slides find their application in a wide range of furniture styles and settings. They are commonly used in kitchen cabinets, office storage units, and bedroom furniture. Bottom mount slides are suitable for both residential and commercial applications, providing sturdy support and easy access to the drawer contents.

Now that we have explored the key differences between undermount and bottom mount drawer slides and their respective applications, let's take a closer look at the exceptional products offered by TALLSEN, a reputable provider of high-quality drawer slides.





Key Differences



Undermount Drawer Slides



Bottom Mount Drawer Slides





Mounting Method



Mounted to sides of cabinet and underside of drawer



Mounted to bottom of drawer and cabinet





Clearance



Requires specific measurements and clearance between drawer and cabinet sides



Relatively straightforward installation, visible when drawer is open





Smooth Operation



Built-in dampers or buffers for smooth and quiet closing



Smooth sliding, full extension capabilities





Aesthetic Appeal



Hidden when drawer is closed, providing a clean and seamless look



Visible when drawer is open





Weight Capacity



Generally suitable for lighter loads



Sturdy construction, higher weight capacity





Applications



Ideal for modern and contemporary furniture designs



Suitable for various furniture styles and settings









Discover TALLSEN Undermount Slides


1. Full Extension buffer Undermount Drawer Slides SL4336

The TALLSEN Full Extension buffer Undermount Drawer Slides, model SL4336, is a drawer slide designed specifically for wooden drawers. This undermount slide rail is installed discreetly beneath the drawer, preserving the original style and design of your furniture. With its built-in buffering feature, this slide ensures that your drawers close smoothly and quietly, without any banging or jarring.

Features:

--Made of high-quality galvanized steel for excellent corrosion resistance.

--Suitable for both frameless and face-frame cabinets, providing versatility in installation.

--Offers full extension capabilities, allowing the drawer to be opened fully for easy access to contents.

--Features built-in rollers and dampers for a smooth pull and silent closing.

--Easy to install and provides a sleek and streamlined appearance, making it ideal for modern furniture designs.





2. American Type Full Extension Push-To-Open Undermount Drawer Slides SL4365

The American Type Full Extension Push-To-Open Undermount Drawer Slides, model SL4365, are highly sought-after rebound hidden rails commonly used in Europe and American countries. These slides are an essential component of modern cabinets. The rail system is designed in three sections to enhance functionality and safety.

Features:

--The first section absorbs impacts, reducing the risk of damage or injury.

--The second section ensures smooth and effortless sliding of the drawer along the track.

--The third section acts as a rebound buffer, gently pushing the door back in the opposite direction to prevent slamming shut.

--Unique installation design allows for quick installation on the back and side panels of the drawer.

--1D adjustment switches provide control over the gap between drawers.

--Made of environmentally friendly galvanized steel, offering increased load-bearing capacity and resistance to rust.

--Complies with the European EN1935 standard and has passed the SGS test.

--Fatigue tested for 80,000 cycles under a load of 35kg without interruption.

--Available in various lengths: 305mm / 12", 381mm / 15", 457mm / 18", 533mm / 21".



Summary
In summary, undermount and bottom mount drawer slides are two distinct types of slides that offer unique features and benefits. Undermount slides are installed underneath the drawer and remain hidden from view, providing a sleek and modern design. On the other hand, bottom mount slides are visible when the drawer is open, but they are easier to install and offer stable and reliable support.

The choice between undermount and bottom mount drawer slides largely depends on personal preference, furniture style, and the intended usage of the drawer. Undermount slides are ideal for high-end cabinetry and custom furniture projects that require a polished and streamlined appearance, while bottom mount slides are suitable for everyday use in many residential and commercial applications.

At TALLSEN, customers can find a wide selection of premium quality drawer slides that are durable, reliable, and easy to install. Whether you need undermount or bottom mount slides for your furniture or cabinetry project, TALLSEN has the perfect solution to meet your needs and exceed your expectations. With their expertise and commitment to quality, TALLSEN is a trusted choice for drawer slides that are designed to last.