Indoor wooden door hinge size




Indoor wooden door hinge size


Indoor wooden door hinge size, the hinge is a very important tool for our decoration, so the hinge of the wooden door is also an important choice, the size of the hinge is also very important, then the following share the size of the indoor wooden door hinge.


Indoor wooden door hinge size1

1. Indoor wooden door hinge size


The most commonly used hinge specifications for interior doors, that is, the length, width and thickness are 100px75px3mm, 125px75px3mm, 100px75px2.5mm (less used for home decoration). If your home is installed with solid wood composite doors, It is recommended that you install three hinges with a specification of 100px75px3mm, or, if you install a lightweight molded door, you can install two hinges with a specification of 125px75px3mm. For overweight solid wood doors, it is best to use three hinges with specifications of 125px75px3mm.





2. Selection of various hinges


Door hinge: The material is copper and stainless steel. The standard single-piece hinge area is 10*3cm and 10*4cm, the central axis diameter is between 1.1-1.3cm, and the hinge wall thickness is 2.5-3mm. In order to open easily and without noise when opening the hinge, it is better to choose a hinge with a ball bearing in the middle shaft.


Drawer rail hinges: divided into two-section rails and three-section rails. When choosing, the brightness of the surface paint and electroplating, the gap and strength of the load-bearing wheels determine the flexibility and noise of the drawer opening and closing. Wear resistance and uniform rotation should be selected load-bearing wheels.


Cabinet door hinge: divided into detachable type and non-detachable type, and the cover position after the cabinet door is closed is divided into three types: large bend, medium bend, and straight bend. In addition to the smooth and smooth surface of the hinge, you should pay attention to the good reset performance of the hinge spring. You can open the hinge 95 degrees, press the two sides of the hinge with your hands, and observe that the supporting spring is not deformed or broken. If it is very strong, it is a qualified product. .


Third, carefully observe the materials and accessories


Material: Steel hinges are easy to rust and are not suitable for general use in humid environments; copper hinges have corrosion resistance and antibacterial functions and are suitable for use in bathrooms; aluminum hinges have low strength and are generally thicker; stainless steel is decorative, The functions are relatively good, and it is a product commonly chosen by many families. However, when buying, be careful when buying products with surface coatings. You can also weigh the weight of similar products of different brands, and heavy products are better.


Appearance: Whether the surface of the hinge is smooth, if scratches or deformations are seen, it means that the product is produced from waste materials; secondly, carefully observe the surface treatment of the hinge, scratch to see if you can see the yellow copper layer, or look inside the hinge cup, If the cup shows the same black water level or iron color, it proves that the coating is very thin, and there is no copper plating. If the color and brightness of the cup are close to other parts, the electroplating is passed. Generally speaking, the workmanship is good. The appearance of the page is beautiful, the gap is small, and the use will be more reliable.


Bearing: The quality of the flat hinge mainly depends on the quality of the bearing. The larger the diameter of the bearing, the better, and the thicker the wall, the better. Hold one piece of the hinge flat with your hand and let the other slide freely. It is better to use a uniform and slow speed.


Closing: Listen to the sound of the hinge closing, whether it is crisp or not, if the closing sound is dull, it proves that the spring strength is not enough, and there is a problem with the thickness of the material; check whether the hinge cup is loose, if it is loose, it proves that the rivet is not tightly riveted and is easy to fall off. Close and close a few times to see if the indentation in the cup is obvious. If it is obvious, it proves that there is a problem with the thickness of the cup material, and it is easy to "explode the cup".


Screw: Since the hinge arm is made of iron material, it is not as hard as the screw, so it is easy to wear; in addition, if the precision of the factory tapping is not enough, it is easy to cause slippage or the situation that the screw cannot be screwed.


This article introduces the purchase size of the hinges of interior doors in detail, and also introduces how to choose a hinge that is more suitable for you. If you want to choose a hinge that is more suitable for you, then you'd better Carefully refer to these purchasing methods introduced in this article.


Indoor wooden door hinge size2

Hinge classification and specifications


1. Hinges are also called hinges (the hinges and hinges in the domestic market refer to different types of goods). It is composed of a pair of metal or non-metallic blades connected by pivot pins, often of two-fold type. It is a door, cover or other that requires a swing switch. A device whereby two parts of a device are connected and rotated relative to each other. Hinges are generally composed of the following accessories: hinge sheets, hinge shafts, hinge bearings, hinge plugs (beautiful, shaft anti-off effect) classification of hinges: T-type hinges, H-type hinges , core-pulling hinges, vehicle hinges, marine hinges, etc.


2. Hinge specification and size, length*width, 2 inches*1.5 to 1.8 inches, 2.5 inches*1.7 inches, 3 inches*2 inches, 4 inches*3 inches, 5 inches*3 to 3.5 inches, 6 inches*3.5 inches Up to 4 inches. Note, inch refers to inch, 1 inch = 25.4MM



Hinge Size Recommendations


Now the standard hinge size on the market is 4 inches, 10cm, the material is stainless steel, the thickness is about 3MM, it is recommended to install 3 hinges for a door. Because the international standard door height exceeds 1.9 meters, 3 hinges are needed. Hinge, better protection for the door, strong load-bearing. If you use 2 hinges, the door is indeed easy to sag after a few years. If you use 3 hinges, you can ask the decorator not to install them in 3 points normally, so that the load-bearing is more It is better and more stable. Install 2 pieces of hinges on the top of the door, and one piece in the middle, so as to protect the door.


The above is my simple answer to the hinge size standard, but the specific standard or usage quantity should be determined according to your actual situation. If you want to install it, I suggest that you ask a professional master to come, and finally I hope my answer can help you a little bit.


Several hinges for interior doors Hinge door selection skills

Master different precautions and adjustment methods. The following is about these types of content. I hope everyone can pay more attention to the selection skills of different hinges, improve the efficiency of selection, reduce unnecessary problems, and make it more convenient to install doors. .


It is not very difficult to choose hinges. When you choose these materials, you should pay more attention to several hinges for interior doors and hinge door selection skills, and master different precautions and adjustment methods. The following is about these Type of content, I hope everyone can pay more attention to the selection skills of different hinges, improve the efficiency of selection, reduce unnecessary problems, and make it more convenient to install doors.


Several hinges for interior doors


There are actually many types of hinges for interior doors. Generally, it is more convenient to use two hinges. But if you feel that it is not fixed, you can add one.


1. The width and height of the interior door, if it is 200*80cm, it would be better to install two hinges, the hinges are generally four inches.


2. Generally, the hinges with good quality, the four-inch hinges are about 100mm in length, and the unfolded width is generally 75mm. You can choose 2, and the thickness can be 3mm and 3.5mm, which are very suitable.


3. Choose according to the material of the door. If it is a hollow door, 2 hinges are enough. If it is a solid wood composite door or a log door, you can install 3 hinges.


Hinge door selection skills


Hinge door is composed of door frame, door leaf, hinge and other hardware accessories, and any part cannot be missing. If you want to talk about how to choose a hinge door, you should also start from three aspects: door frame, door leaf and hinge.


1. Look at the material


Whether you choose a door or a hinge, you must first determine what materials they use, and you must know whether the material is good or bad. For example, a solid wooden door depends on the material type and weight, and a hinge depends on stainless steel, iron, copper, aluminum alloy, etc. quality.


2. Look at the price


Although you can't believe that "you get what you pay for", you must at least understand the truth. The reason why low-priced doors, windows and hardware accessories can be sold at such a low price must be that the cost is very low, and it is difficult to Use high-quality raw materials. Therefore, if the price is too cheap, you need to be cautious. But if the price is too high, you need to compare.


3. Look at the brand


A well-known and well-reputed brand must have something special, which is applicable to any industry. When choosing a hinge door, if you dont have any good skills, you can actually choose a high-quality brand. Avoid picking up inferior products.


4. Look at the craft


The process mainly depends on whether the processing of the product is fine or not. For example, whether the lines of the door are smooth, whether the angle is uniform, whether there will be unreasonable gaps during splicing, etc. Whether the corners are perfect, etc. These can be observed during the selection process, mainly because you are careful and patient enough.


The above content is the selection skills of several hinges and hinge doors for interior doors. When you choose these home decoration products, you should consider a variety of different selection skills and methods, such as understanding the approximate material and specific manufacturing process. Some The price of the brand is more expensive, but the quality is not so good, and there are still some chemical problems, and it emits an abnormal smell, so don't choose randomly.


How to install the door hinge, the style and size of the hinge

Doors are installed in each of our homes, which can protect our privacy and the safety of our homes very well, and bring a lot of convenience to our lives. However, the door hinges cannot be used to play their due role. Small sight. But readers, are you familiar with door hinges? In fact, door hinges are often encountered in daily life. Next, lets get to know them together with the introduction of the editor. So, how about door hinges? Install?


the
How to install the door hinge


Before installation, check whether the hinge matches the door and window frame and leaf, check whether the hinge groove matches the height, width, and thickness of the hinge, check whether the hinge is matched with the screws and fasteners connected to it, and whether the hinge of the villa door The connection method should match the material of the frame and leaf. For example, the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected to the wooden door leaf is fixed with wood screws.


In the case that the two leaf plates of the door hinge are asymmetrical, it should be identified which leaf plate should be connected to the fan, which leaf plate should be connected to the door and window frame, and the side connected to the three sections of the shaft should be fixed to the frame. The side connected to the two sections of the shaft should be fixed with the doors and windows. When installing, it should be ensured that the shafts of the hinges on the same leaf are on the same vertical line to prevent the doors and windows from bouncing.


the
Hinge style and size


There are many styles, specifications and sizes of hinges. From the style alone, they can be divided into more than a dozen types such as ordinary hinges, H hinges, window hinges, and cross hinges, not to mention the choice of each hinge size. .Although there are so many hinge styles, there are several kinds of hinges that are often used in home decoration. The most common is the 4-inch hinge, that is, 4*3*3 hinge, 4 means the length is 10cm, 3 is Refers to the width of 3cm, and 3 refers to the thickness of 3mm. This kind of ordinary hinge is most commonly used in various room doors, including study doors, bedroom doors, bathroom doors, etc. In addition to ordinary hinges, the other one can be opened without slotting. Letter hinges that can be installed directly are also very popular, but because of their different structures, they are more suitable for use on lightweight doors and windows, such as paint-free doors, bathroom doors, etc.


the
Choice of hinges for different doors


The hinges of the door need to use anti-theft hinges, which are usually matched with the door and do not need to be purchased again. The hinges used for cabinet doors can use long rows of hinges. One hinge of this kind is 1.8m long. It can install 3 cabinet doors, and you can also choose to use a pipe hinge or an ordinary small hinge. The installation of the pipe hinge will be more convenient, but the function is relatively small. There are many sizes of the pipe hinge, plus the full cover (hinge There is a frame next to it), half cover, no cover, etc. You need to measure the size of the cabinet at home and choose it accurately. If you want to install a hidden door at home, you need to use a cross hinge, which can be completely hidden after closing the door , so it is also called a hidden hinge. When choosing the hinge size, it can be determined according to the thickness of the door and the door frame. Usually, the cross hinge has a variety of sizes such as 45mm, 70mm, and 95mm. If it cannot be installed, it is best to measure the thickness of the door before making a choice. The hinges of the doors and windows, no matter the size or style, should be adjusted according to the specific position and function of the doors and windows. During the decoration process, it must not In order to save time and money, all doors and windows use hinges of uniform specifications. If you choose hinges well, it will be smoother and more convenient to use doors and windows in your future life.


There are so many door hinges introduced by Xiaobian today. I believe that everyone has a certain understanding of door hinges. When choosing door hinges, you may wish to consider these methods introduced by Xiaobian. Door hinges Hinge brings a lot of convenience to our life and protects our home and privacy. You need to understand the installation method of door hinges. In fact, knowing more about Hinge is also very helpful for our life. I hope my introduction It can help readers and friends.


The installation position of the door hinges How many hinges are suitable for installation

Some people don't pay much attention to these situations, so many problems occur in the installation process, and the quality of use has a very big direction. The following are some installation methods and techniques for door hinges. I hope everyone can refer to them and find the ones that suit you. plan.


There are many references to the choice of door hinges, such as the installation position of the door hinge and the appropriate number of hinges to install, but some people do not pay special attention to these situations, so many problems arise during the installation process. Quality has a very big direction. The following are some installation methods and techniques for door hinges. I hope everyone can refer to them and find a solution that suits them.


The installation position of the door hinge


During the installation process of the door hinge, it is necessary to check whether it matches the door and window, and then determine the height, thickness and width of the installation, and then fix it.


1. Before installation, check whether the hinges match the door and window frames and leaves.


2. Check whether the hinge groove matches the height, width and thickness of the hinge.


3. Check whether the hinge and the screws and fasteners connected to it are matched.


4. The connection method of the hinge should match the material of the frame and leaf, such as the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected to the wooden door leaf is fixed with wood screws.


5. When the two leaf plates of the hinge are asymmetrical, it should be identified which leaf plate should be connected to the fan, which leaf plate should be connected to the door and window frame, and the side connected to the three sections of the shaft should be fixed to the frame , the side connected to the two sections of the shaft should be fixed with the doors and windows.


6. When installing, it should be ensured that the shafts of the hinges on the same leaf are on the same vertical line, so as to prevent the doors and windows from springing up. The materials of the hinges generally include stainless steel, pure copper and iron. If it is installed at home, Then it is recommended that you choose 304 stainless steel, because the cost of pure copper is relatively high, and iron is easy to rust. Compared with stainless steel hinges, they are both practical and cost-effective.


It is suitable to install several hinges


1. The width and height of the interior door, if it is 200*80cm, it is better to install 2 hinges. The hinges are generally four inches. Whether the size of the hinge matches the material of the door leaf and the door frame? The purpose of doing so It is to determine the connection method more quickly.


2. Generally, the hinges with good quality, the four-inch hinges are about 100mm in length, and the unfolded width is generally 75mm. You can choose 2, and the thickness can be 3mm and 3.5mm, which are very suitable.


3. Choose according to the material of the door. If it is a hollow door, 2 hinges are enough. If it is a solid wood composite door or a log door, you can install 3 hinges.


The above introduction is the installation location of the door hinge and how many hinges are suitable for installation. If you want to install the hinge, you should first analyze various phenomena, including the number of installations, the location of the installation, and the location of the installation. Steps, etc. Some products may have some bad gases or harmful chemical components, so everyone should pay attention to the composition of various Lilypage products.



Can a five-inch hinge be replaced by a four-inch hinge?

Yes. The length of the four-inch hinge is 100mm, and the five-inch hinge is suitable for the installation of the interior door. The length of the five-inch hinge is 125mm, and the length is not much different. It can be replaced with a four-inch hinge for the installation of the interior door. .Door and night, also known as hinge, is also called hinge, which is used to fix the position of the door. It is used for cabinet doors, windows, doors, etc. The material is divided into iron, copper, and stainless steel.



Tallsen always sticks to our tenet of "quality comes first" by focusing on the quality control, service improvement, and fast response.
Tallsen has been specialized in producing for many years.By offering the most considerate service, we aims to provide the most delicate .Hinge is made of multiple ingredients that are good for your skin, without any spices and chemicals. It is a reliable product for all skin types.At Tallsen, it is our skilled workers, advanced technology, and systematic management system that contribute to sustainable growth.
Leading R&D level: Our industry-leading R&D level has been achieved through continuous research and technological development, as well as by unleashing the creativity of our designers.
Fine in workmanship, safe in operation and long in service life, Tallsen's are labor-saving and practical.Tallsen was founded in . After years of development, our company gains further understanding of jewelry business. Besides, we greatly improve the level of design, production, and service in the process.If the return is caused by the product quality or the mistake from us, you will be guaranteed to get 100% refund.

The half-cover hinge and the full-cover hinge are both types of hinges used for cabinet doors, but they have some differences in design and usage. Here are the main differences between the two:
1. Concept: The full-cover hinge means that when the cabinet door is closed, the vertical plate of the cabinet body is completely hidden, and the vertical plate on the side of the hinge is fully covered by the door panel. On the other hand, the half-cover hinge means that when the cabinet door is closed, the vertical plate on the hinge side is only partially covered by the door panel.
2. Installation size: The installation size refers to the position where the hinge is covered. The full-cover hinge has a cover position of 18mm, while the half-cover hinge has a cover position of 9mm.
3. Usage methods: Although both types of hinges can be used to adjust the distance between the door panel and the vertical panel, they have different usage methods. If there are only two doors and they are externally hung, it is suitable to use a full-cover hinge. If there are more than two doors and they are also externally hung, it is suitable to choose a half-cover hinge.
In summary, the full-cover hinge completely covers the vertical panel on the side of the hinge, while the half-cover hinge only partially covers it. The choice between the two depends on the number of doors and the installation method.

Expanding on the topic of adjusting cabinet door hinges, it is important to note that there are several reputable hardware hinge brands available on the market. Some of the best brands currently include Dinggu, Yajie, Bailong, and Huitailong. These brands offer reliable and durable products, although they might be more expensive. However, it is worth mentioning that each brand offers both medium and high-end options, so it is advisable to opt for a high-end hinge from a lesser-known brand rather than an ordinary hinge from a top brand.
In terms of quality, domestic brands such as Huitailong and DTC Dongtai are highly recommended. While imported hinges are also available, they may not necessarily be superior in all aspects compared to domestic options. In particular, imported two-hole hinges are not recommended. However, it is important to consider that hardware hinges from foreign brands are generally well-known and highly reputed, with brands like Tallsen, Blum, and Ferrari being particularly renowned. These foreign brands have been in the industry for a long time and have established a strong reputation. Therefore, many big brand cabinets, overall wardrobes, and custom furniture use these international brand hardware hinges, as they offer stable quality and a good reputation.
When installing cabinet door hinges, it is important to consider the risk of deformation over time. To minimize this risk, it is recommended to install one or two additional hinges. Additionally, hinges with cushioning are more expensive but offer a better user experience. Therefore, it is advisable to purchase hinges with cushioning, as the price difference is not significant.
It is crucial to dispel the misunderstanding that customers tend to prioritize door panels over hardware when purchasing cabinet doors. In reality, hardware is equally if not more important. With stricter environmental regulations in recent years, nearly all door panels available on the market are environmentally friendly, as long as they are not excessively cheap. Therefore, the style and quality of the hardware should not be overlooked.
Adjusting the hinge of an anti-theft door is done by adjusting the distance between the two screws located above it. A door hinge is a device that allows a door to rotate open and close smoothly. It consists of a hinge seat and a hinge body. One end of the hinge body is connected to the door frame through a mandrel, while the other end is connected to the door leaf. The hinge body is divided into two sections, with one connected to the mandrel and the other to the door leaf. These two sections are joined together through a connecting plate, which has holes for adjusting the gap between the doors.
The connecting plate's gap adjustment holes include long holes for adjusting the vertical gap between the doors and long holes for adjusting the horizontal gap between the doors. This means that the hinge can be adjusted not only vertically but also horizontally.
Tallsen is a highly customer-oriented brand that aims to provide the best products and services to each customer efficiently. With years of experience in the industry, Tallsen specializes in producing high-quality hinges. The brand is known for its impermeable, frost-resistant, corrosion-resistant, and abrasion-resistant hinges, which can be widely used in municipal gardens, roads, plazas, industrial and residential construction projects.
With advanced production technology, including welding, cutting, polishing, and more, Tallsen promises flawless products and provides considerate service to its customers. The brand's leading R&D level is achieved through continuous research, technological development, and the tireless creativity of its designers. Tallsen offers a wide range of high-quality hinges that cater to the diverse needs of different customers.
Founded many years ago, Tallsen has grown into an enterprise with multiple production equipment and strong technical capabilities. The brand has dedicated years of hard work to ensure customer satisfaction. If a return is necessary due to product quality issues or mistakes made by Tallsen, customers are guaranteed a full refund.
In conclusion, when adjusting cabinet door hinges, it is important to consider reputable brands such as Dinggu, Yajie, Bailong, and Huitailong. Domestic brands like Huitailong and DTC Dongtai are highly recommended, as they offer comparable quality to imported hinges but at a more affordable price. Additionally, it is crucial not to overlook the importance of hardware when purchasing cabinet doors, as it plays a significant role in the overall functionality and longevity of the doors. When it comes to adjusting the hinge of an anti-theft door, the distance between the two screws above the hinge can be adjusted to ensure smooth and natural movement. Tallsen is a customer-oriented brand that specializes in producing high-quality hinges, offering a wide range of options to meet different customer needs. With a strong focus on research and development, Tallsen continuously strives to provide excellent products and services to its customers.