Disassembly video of the bottom damping drawer slide rail (how to take down the damping drawer

Expanding on "How to Take Down the Damping Drawer":

Taking down a damping drawer can be a simple process when following the correct steps. The drawer damping track is usually side-mounted, and the drawer can be easily pulled out. To remove the drawer, there is usually a small plastic piece on both sides of the drawer track that can be pressed. By pressing this plastic piece, the drawer can be released and taken out.

In the case of a bottom rail drawer, there are usually two handles located under the drawer. These handles can be pressed to release the drawer from the bottom track. Regardless of the brand of guide rail, the process remains the same.

For those looking to remove a bottom track drawer while mopping the floor, there are specific steps to follow:

1. Locate the slide rail at the bottom of the drawer. One side of the slide rail will have a pin used for fixation. This pin is indicated by a red arrow in the diagram.

2. Gently pull out the pin on the drawer slide rail. The bottom track will not have a fixed pin. This is indicated by the red circle in the diagram.

3. Open the drawer and lift it up in the direction indicated by the arrow in the diagram. This will allow the bottom-supporting track drawer to be removed.

To further explain the process of disassembling a slide rail drawer, there are additional steps to consider:

Step 1: Determine the type of slide rail in your home, such as a three-section track or sheet metal slide rail. If it is a three-section track, gently pull out the cabinet. Before turning it upside down, carefully check for any sharp objects on both sides of the cabinet. These may be plastic bullet cards. Press the plastic bullet cards down twice to release the cabinet. Once the cabinet is released, it can be easily taken out. In the process of removing the cabinet, ensure that it remains in a stable and horizontal position to avoid damaging the tracks on either side.

Step 2: Similarly, the cabinet should be pulled out carefully, maintaining stability to avoid any damage. Check for any pointed buttons and press them down if able to hear a click sound. After pressing, gently remove the cabinet while keeping it flat to minimize damage to the track. Once the cabinet is out, inspect the drawer's track slide for any deformations. If there are deformations, adjust the position and fix it before reinstalling it.

When choosing drawer slide rails, there are essential key points to consider:

- Steel Quality: The quality of the steel used in the track determines the load-bearing capacity of the drawer. Different drawer specifications have varying steel thicknesses, which affect the weight the drawer can bear. When purchasing, manually pull out the drawer and press it to test for any looseness, rattling, or instability.

- Material of Pulley: The material of the pulley plays a significant role in determining the smoothness and quietness of the drawer when sliding. Plastic pulleys, steel balls, and wear-resistant nylon are common choices. Among them, wear-resistant nylon is considered top grade for its quiet sliding without any noise.

- Pulley Performance: Test the pulley performance by pushing and pulling the drawer with one finger. It should glide smoothly without any resistance or noise.

- Pressure Device: Pay attention to the functionality of the pressure device. Test its effectiveness in saving effort and convenience in braking. Although a well-functioning pressure device may come at a higher price, it is worth considering for enhanced utility.

By following these expanded guidelines, you can successfully take down damping drawers and make informed decisions when choosing suitable slide rails for your cabinets.