Should the drawer slides be installed on the side or on the bottom? How to remove the track drawer d

When it comes to installing drawer slides, there is some debate on whether they should be installed on the side or on the bottom of the drawer. While both options have their advantages and disadvantages, most experts agree that installing the drawer slides on the bottom is the better choice.

First, let's go through the process of installing the drawer slides on the bottom. To begin, you will need to fix the five boards of the drawer together and securely fasten them with screws. The drawer panel should have a card slot for easy installation. Additionally, there will be two small holes in the middle of the panel for attaching the handle.

Next, you will need to disassemble the track of the drawer slide rail. The narrow part of the rail should be installed on the drawer itself, while the wider sections are installed on the cabinet body. When installing the slide rail, make sure that the bottom is flat against the drawer side panel and the front is flat against the front of the panel. It is important to distinguish between the front and back of the slide rail to ensure proper installation.

Once the cabinet body is positioned, you can begin the installation process. Start by screwing the white plastic hole onto the side panel of the cabinet body. Then, install the wide track that was removed earlier and secure it with two small screws. It is important to install and fix slide rails on both sides of the cabinet body to ensure stability.

Before installing the rails, it is necessary to remove the inner rails from the slides on the movable cabinet. These inner rails will then be installed on both sides of the drawer. It is important to be careful when disassembling the rails to avoid any damage. While the removal process is relatively simple, it still requires attention.

It is worth noting that the metal guide rail used in drawer slides has a limited lifespan. If the drawer contains many heavy objects, the opening and closing motion may become less smooth over time. Long-term use can also cause deformation and damage to the metal slide rail, resulting in a less smooth push and pull mechanism. To prevent these issues, it is important to be mindful of the weight placed in the drawer and consider replacing the slide rails when needed.

To remove the drawer track, start by easily pulling out the cabinet body. Pay attention to keep the cabinet stable during this process. A long, black tapered buckle will appear. While pulling out the cabinet, check if there are any pointed buttons on both sides. If there are, press them down with your hands. A clicking sound will indicate that the cabinet can be taken out directly. After pressing the buttons, gently take out the cabinet body in a flat position to avoid damaging the track. Once the cabinet is pulled out, check the track for any deformations. If deformations are present, adjust the position accordingly and reinstall and fix it using the previous method.

When it comes to reinstalling the drawer, simply push it back along the track. The black buckle will automatically connect with the original card slot. Push the drawer all the way in, then pull it back to ensure it moves freely.

In conclusion, when installing drawer slides, it is generally recommended to install them on the bottom of the drawer. This provides better stability and smoother opening and closing motion. However, it is always important to consider the specific requirements of your project and follow the manufacturer's instructions for the best results.