The gas spring strut, as a key profit-maker in Tallsen Hardware, is always recognized for high cost-performance ratio and specific application. 'These are reasons for its good sales here,' is a comment made by our purchaser. This can be attributed to the design, manufacturing, and quality control mainly. At the very beginning, we carried out a lot of market research and analyzed the consumers' demands. This is the basis for the design which was then proven to be a perfect combination of aesthetics and functions. The manufacturing is standardized and traceable. This guarantees the product quality from the source. The final inspection is also very important, making the product 100% assured.
We make efforts to grow our Tallsen by international expansion. We have prepared a business plan to set and evaluate our goals before we get started. We move our goods and services to the international market, making sure we package and label them in accordance with regulations in the market we are selling to.
TALLSEN are structured elaborately to serve the differing needs of customers and we support our clients with services through the entire lifecycle of gas spring strut.
what does spring mean
Spring is a mechanical part that uses elasticity to work. Parts made of elastic materials are deformed under the action of external force, and then return to their original shape after removing the external force. It is also called "spring". It is generally made of spring steel. The types of springs are complex Various, according to the shape, there are mainly coil springs, scroll springs, leaf springs, special-shaped springs, etc.
Spring hinge installation method What are the spring hinge brands?
What is a spring hinge
The spring hinge is a hinge that can automatically close the door after it is opened. It is equipped with a spring and an adjusting screw, which can adjust the height and thickness of the plate up and down, left and right. The single spring hinge can only be opened in one direction, and the double spring hinge can be opened in and out. Two-way opening, mainly used on the gate of public buildings.
There are several spring hinges
Types of spring hingesordinary spring hinges
Ordinary spring hinges are used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.
Types of Spring HingesPipe Spring Hinges
The pipe spring hinge is also called a spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a thickness of 16-20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height of the panel up and down, left and right , Thickness. One of its characteristics is that it can match the opening angle of the cabinet door according to the space. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that various cabinet doors can be stretched accordingly. Spend.
Types of spring hingesdoor spring hinges
The door spring hinge is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, copper bearing hinges are more used. , because of its beautiful and bright style, moderate price, and equipped with screws.
Types of spring hingesother spring hinges
Other spring hinges include glass hinges, countertop hinges, and flap hinges. Glass hinges are used to install frameless glass cabinet doors, and the glass thickness is required to be no more than 5-6 mm.
Spring hinge installation method
The installation process of the spring hinge is relatively simple. After preparing the tools, measure the position and position, and fix the hinge to complete the installation. Netizens can also install it at home
1. Preparation tools
Prepare special installation tools before installation, such as tape measure/level for measuring, carpenters pencil for line drawing and positioning, woodworking hole saw/pistol drill for opening holes, screwdriver for fixing, etc.
2. Line drawing positioning
First use the installation measuring board or woodworking pencil to mark the position (the drilling edge distance is generally 5 mm), and then use a pistol drill or woodworking hole opener to drill a 35 mm hinge cup installation hole on the door panel, and the drilling depth is generally 12 mm. ;
3. Fixed hinge cup (hinge product)
Insert the hinge into the hinge cup hole on the door panel and fix the hinge cup with self-tapping screws;
4. Fixed base
After the hinge is inserted into the cup hole of the door panel, the hinge is opened, then inserted and aligned with the side panel, and the base is fixed with self-tapping screws;
5. Debugging effect
The last step is to open and close the cabinet door to test the effect.
Ordinary hinges can be adjusted in six directions, aligned up and down, and the left and right of the two doors are moderate. The best effect is to debug the cabinet door. After the door is installed, the gap is generally 2 mm.
hey-hey
only one answer
The triangular piece that catches the spring is worn out, replace it
At the beginning, the strength of the hand pressure is very small, and gradually, you must press hard or the range of the pressure hand is too large, that is, the triangular piece is worn out
what does the spring do
A spring is an elastic element that works through its own large elastic deformation. It is widely used in various machines. Its main functions are:
1. Control the movement of machinery, such as the springs that control the opening and closing of cylinder valves in internal combustion engines, and the control springs in clutches;
2. Absorb vibration and impact energy, such as damping springs in various vehicles and springs of various buffers, etc.;
3. Store and release energy, such as clock springs, bolt springs, etc.;
4. Measure the size of the force, such as the spring in the spring balance and the dynamometer, etc.
Spring is a mechanical part that uses elasticity to work. Parts made of elastic materials are deformed under the action of external force, and then return to their original shape after removing the external force. It is also called "spring". It is generally made of spring steel. The types of springs are complex Various, according to the shape, there are mainly coil springs, scroll springs, leaf springs, special-shaped springs, etc.
What to do if the spring of the unblocker cannot go in
Reverse the dredge, the movement of the thread is the same as the direction of unloading the screw. When turning, it looks like it is moving forward, and the dredge will come out slowly; the machine should be turned on, and stop for a second or two to confirm the spring Only when the bar is not stuck can it be started continuously.
The pipe dredger is a tool used to clean and dredge the sewer. There are steel wire type and pneumatic type. It is an indispensable tool in modern family life. When using it, you should pay attention to the power plug and avoid motor maintenance.
Torsion spring (torsion spring) uses the principle of leverage to twist or rotate the elastic material with soft material and high toughness to make it have great mechanical energy. It is a spring that withstands torsional deformation, and its working part is also the coil either close together or separately.
The end structure of the torsion spring is processed into various shapes of torsion arms, from single torsion to double torsion, and even the deformation of various torsion bars can be formed according to the design.
Extended information:
The spring deforms under the action of external force. After removing the external force, the spring can return to its state. Many tools and equipment are reset by using the property of spring. For example, the hinges of many building gates are equipped with return springs for people to enter and exit Finally, the door will automatically reset. People also use this function to make automatic umbrellas, automatic pencils and other supplies, which are very convenient. In addition, various buttons and keys are also indispensable for return springs.
Utilize the rebound force (tension) after stretching to work to control the movement of parts, store energy, measure the size of force, etc. It is widely used in machines and instruments. The hooks are in the form of side hook extension springs and long hooks. Extension springs, English hook extension springs, German hook extension springs, semicircular hook extension springs, duckbill hook extension springs, etc. The materials include stainless steel, piano steel, high carbon steel, phosphor bronze, oil tempered alloy spring steel, etc. .
Reference source: Baidu Encyclopedia - Spring
what is a spring
spring
Spring is a mechanical part that uses elasticity to work. It is generally made of spring steel. It is used to control the movement of parts, alleviate shock or vibration, store energy, measure force, etc., and is widely used in machines and instruments. The types of springs are complex and diverse, divided by shape, mainly coil springs, scroll springs, leaf springs, etc.
its main function
Control the movement of machinery, such as valve springs in internal combustion engines, control springs in clutches, etc. Absorb vibration and impact energy, such as buffer springs under automobiles and train carriages, vibration-absorbing springs in couplings, etc. Storage and output Energy is used as power, such as clock springs, springs in firearms, etc. Used as force-measuring elements, such as dynamometers, springs in spring scales, etc. The ratio of spring load to deformation is called spring stiffness, and the greater the stiffness, the spring harder.
According to the nature of the force, the spring can be divided into tension spring, compression spring, torsion spring and bending spring, and can be divided into disc spring, ring spring, plate spring, coil spring, truncated cone scroll spring and torsion bar spring according to the shape. .Ordinary cylindrical springs are the most widely used because they are simple to manufacture and can be made into various types according to the loading conditions. Heat treatment performance, etc., commonly used carbon spring steel, alloy spring steel, stainless spring steel, copper alloy, nickel alloy and rubber, etc. Spring manufacturing methods include cold rolling method and hot rolling method. Spring wire diameter less than 8 mm Generally, the cold rolling method is used, and the hot rolling method is used for those larger than 8 mm. Some springs are also subjected to strong pressure or shot blasting after they are made, which can improve the bearing capacity of the spring.
Spring is a kind of elastic element widely used in mechanical and electronic industries. The spring can produce large elastic deformation when it is loaded, and convert mechanical work or kinetic energy into deformation energy. After unloading, the deformation of the spring disappears and returns to its original shape. The deformation energy is converted into mechanical work or kinetic energy.
Spring class
According to the nature of the force, the spring can be divided into tension spring, compression spring, torsion spring and bending spring; according to the shape, it can be divided into disc spring, ring spring, plate spring, coil spring, truncated cone scroll spring and torsion bar spring, etc. .Ordinary cylindrical springs are the most widely used because they are simple to manufacture and can be made into various types according to the loading conditions. Heat treatment performance, etc., commonly used carbon spring steel, alloy spring steel, stainless spring steel, copper alloy, nickel alloy and rubber, etc. Spring manufacturing methods include cold rolling method and hot rolling method. Spring wire diameter less than 8 mm Generally, the cold rolling method is used, and the hot rolling method is used for those larger than 8 mm. Some springs are also subjected to strong pressure or shot blasting after they are made, which can improve the bearing capacity of the spring.
What is a Coil Spring?
The coil spring is a torsion spring, which is a spring that withstands torsional deformation. Its working part is also tightly wound into a spiral shape. The end structure of the torsion spring is a torsion arm processed into various shapes, not a hook ring. Torsion springs are often used in machinery The balance mechanism in it is widely used in industrial production such as automobiles, machine tools, and electrical appliances.
What is a tension spring?
Tension spring is a helical spring that bears axial tension. Tension springs are generally made of circular cross-section materials. When not under load, the coils of the tension spring are generally tight and there is no gap.
What is a Compression Spring?
The compression spring is a helical spring that bears the pressure. The cross-section of the material used is mostly circular, and it is also made of rectangular and multi-strand steel coils. The spring is generally of equal pitch. The shapes of the compression spring are: cylindrical, conical Shape, convex shape and concave shape and a small amount of non-circular, etc., there is a certain gap between the rings of the compression spring, when the spring is subjected to an external load, the spring shrinks and deforms, and stores deformation energy.
What is a torsion spring? The torsion spring uses the principle of leverage to twist or rotate the elastic material with soft material and high toughness, so that it has great mechanical energy.
What to do if the spring of the pipe dredge machine cannot enter the pipe
The spring of the dredger is used to dredge the sewer. When using it, you must wear gloves, insert the wire head into the drain of the toilet, and insert it with your hands until it does not go in. Only by entering the elbow first so that the spring cannot be returned can it be changed. Good work.
The electric drill type toilet is unblocked. What's the matter if the toilet spring can't get in?
Now the toilet is unclogged, and the spring cannot get in. This may be due to some performance reasons, so it should not be able to get in, so this should have a certain influence.
Principle of seat lift gas spring
The lifting devices used in the lift chairs on the market are divided into 3 categories - oil pressure, mechanical and pneumatic. Most of the low-end lift chairs are pneumatic. There is a cylinder in the pneumatic lift chair, and the piston in the cylinder is pneumatic. The up and down movement of the rod controls the lifting of the chair. Regular manufacturers use nitrogen filling, the concentration is generally above 99%, and the pressure is about one or two atmospheres.
The lifting part has the following characteristics:
When pressing the lift valve switch:
When a person sits on it, that is, puts pressure on the lifting shaft, and the lifting shaft will descend smoothly with a uniform speed and can be lowered to the lowest point.
If no external force is applied to the lifting shaft, the lifting shaft will bounce back to the highest point immediately, and the speed is slightly faster, less than one second.
When not pressing (or releasing halfway through) the valve switch:
The lift shaft remains in its current position, neither compression nor tension can move it relative to the outer sleeve.
First understand the simpler free style gas spring:
The free-style gas spring is relatively simple and consists of three parts: a closed cylinder, a piston in the cylinder, and a piston rod extending outside. The air pressure inside the cylinder is greater than the atmospheric pressure outside, and there are small holes on both sides of the piston inside the cylinder. According to the knowledge of high school physics, if the piston rod is pressed inward, the resistance is constant, which is the difference between the air pressure at both ends of the piston rod.
The self-locking type means that a shaft is added to the piston rod of the free type, and the innermost end of the shaft is connected to a valve. This valve is used to control the communication hole of the piston part. When the valve is pressed down, there is a communication hole, which is equivalent to a free type; When the valve pops up, if there is no communication hole, it will be locked.
Here: the cylinder is our outer sleeve; the piston is our lifting shaft; the shaft inside the piston is our valve button switch.
Therefore, for this kind of chair, the air pressure in the sleeve is basically constant when no one is sitting. Look, as a metaphor, most of the shells of the grenade are relatively strong and have not burst, and the grenade handle is pushed out).
There are several kinds of spring hinges, how to install the spring hinges
Have you heard of spring hinges? I believe that many people will be unfamiliar with this word. But in fact, a spring hinge is a part that connects two items. Spring hinges exist in many places in our lives. How much do you know about spring hinges? Do you know how many types of spring hinges there are? Then, the editor will introduce to you the several types of spring hinges and how to install the spring hinges.
There are several spring hinges
1. Ordinary spring hinge
Ordinary spring hinges are used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.
2. Pipe spring hinge
Pipe spring hinge is also called spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a plate thickness of 16-20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height of the plate up and down, left and right , Thickness. One of its characteristics is that according to the space, the opening angle of the cabinet door. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that various cabinet doors have corresponding extensions. .
3. Door spring hinge
The door spring hinge is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, copper bearing hinges are more used. , because of its beautiful and bright style, moderate price, and equipped with screws.
4. Other spring hinges
Other spring hinges include glass hinges, countertop hinges, and flap hinges. Glass hinges are used to install frameless glass cabinet doors, and the thickness of the glass is required to be no more than 5 to 6 mm.
How to install the spring hinge
The spring hinge supports two states of fully open and fully closed, and it will automatically close in the middle state. If you want the door to reset to closed, after installing the spring hinge, what state will it be opened to by people passing by? It can be automatically reset to the closed state. And it is push-pull bidirectional. The spring hinge is mainly used for cabinet doors and wardrobe doors. It generally requires a plate thickness of 18-20mm. From the material, it can be divided into: galvanized iron, zinc alloy. In terms of performance, it can be divided into two types: holes need to be drilled and holes need not be drilled. No holes are called bridge hinges. Bridge hinges look like a bridge, so they are commonly called bridge hinges. How to install it?
1. Before installation, check whether the hinges match the door and window frames and leaves.
2. Check whether the hinge groove matches the height, width and thickness of the hinge.
3. Check whether the hinge and the screws and fasteners connected to it are matched.
4. The connection method of the hinge should match the material of the frame and leaf, such as the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected to the wooden door leaf is fixed with wood screws.
5. When the two leaf plates of the hinge are asymmetrical, it should be identified which leaf plate should be connected to the fan, which leaf plate should be connected to the door and window frame, and the side connected to the three sections of the shaft should be fixed to the frame , the side connected to the two sections of the shaft should be fixed to the frame.
6. When installing, it should be ensured that the shafts of the hinges on the same leaf are on the same vertical line, so as to prevent the door and window leaves from springing up.
The above is the editor's introduction to several types of spring hinges and how to install spring hinges. What is our installation method for spring hinges? We already have a general understanding of what the characteristics of the spring hinge are, and I hope the above introduction can help everyone.
what does spring mean
Spring is a mechanical part that uses elasticity to work. Parts made of elastic materials are deformed under the action of external force, and then return to their original shape after removing the external force. It is also called "spring". It is generally made of spring steel. The types of springs are complex Various, according to the shape, there are mainly coil springs, scroll springs, leaf springs, special-shaped springs, etc.
Spring hinge installation method What are the spring hinge brands?
What is a spring hinge
The spring hinge is a hinge that can automatically close the door after it is opened. It is equipped with a spring and an adjusting screw, which can adjust the height and thickness of the plate up and down, left and right. The single spring hinge can only be opened in one direction, and the double spring hinge can be opened in and out. Two-way opening, mainly used on the gate of public buildings.
There are several spring hinges
Types of spring hingesordinary spring hinges
Ordinary spring hinges are used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.
Types of Spring HingesPipe Spring Hinges
The pipe spring hinge is also called a spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a thickness of 16-20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height of the panel up and down, left and right , Thickness. One of its characteristics is that it can match the opening angle of the cabinet door according to the space. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that various cabinet doors can be stretched accordingly. Spend.
Types of spring hingesdoor spring hinges
The door spring hinge is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, copper bearing hinges are more used. , because of its beautiful and bright style, moderate price, and equipped with screws.
Types of spring hingesother spring hinges
Other spring hinges include glass hinges, countertop hinges, and flap hinges. Glass hinges are used to install frameless glass cabinet doors, and the glass thickness is required to be no more than 5-6 mm.
Spring hinge installation method
The installation process of the spring hinge is relatively simple. After preparing the tools, measure the position and position, and fix the hinge to complete the installation. Netizens can also install it at home
1. Preparation tools
Prepare special installation tools before installation, such as tape measure/level for measuring, carpenters pencil for line drawing and positioning, woodworking hole saw/pistol drill for opening holes, screwdriver for fixing, etc.
2. Line drawing positioning
First use the installation measuring board or woodworking pencil to mark the position (the drilling edge distance is generally 5 mm), and then use a pistol drill or woodworking hole opener to drill a 35 mm hinge cup installation hole on the door panel, and the drilling depth is generally 12 mm. ;
3. Fixed hinge cup (hinge product)
Insert the hinge into the hinge cup hole on the door panel and fix the hinge cup with self-tapping screws;
4. Fixed base
After the hinge is inserted into the cup hole of the door panel, the hinge is opened, then inserted and aligned with the side panel, and the base is fixed with self-tapping screws;
5. Debugging effect
The last step is to open and close the cabinet door to test the effect.
Ordinary hinges can be adjusted in six directions, aligned up and down, and the left and right of the two doors are moderate. The best effect is to debug the cabinet door. After the door is installed, the gap is generally 2 mm.
hey-hey
only one answer
The triangular piece that catches the spring is worn out, replace it
At the beginning, the strength of the hand pressure is very small, and gradually, you must press hard or the range of the pressure hand is too large, that is, the triangular piece is worn out
what does the spring do
A spring is an elastic element that works through its own large elastic deformation. It is widely used in various machines. Its main functions are:
1. Control the movement of machinery, such as the springs that control the opening and closing of cylinder valves in internal combustion engines, and the control springs in clutches;
2. Absorb vibration and impact energy, such as damping springs in various vehicles and springs of various buffers, etc.;
3. Store and release energy, such as clock springs, bolt springs, etc.;
4. Measure the size of the force, such as the spring in the spring balance and the dynamometer, etc.
Spring is a mechanical part that uses elasticity to work. Parts made of elastic materials are deformed under the action of external force, and then return to their original shape after removing the external force. It is also called "spring". It is generally made of spring steel. The types of springs are complex Various, according to the shape, there are mainly coil springs, scroll springs, leaf springs, special-shaped springs, etc.
What to do if the spring of the unblocker cannot go in
Reverse the dredge, the movement of the thread is the same as the direction of unloading the screw. When turning, it looks like it is moving forward, and the dredge will come out slowly; the machine should be turned on, and stop for a second or two to confirm the spring Only when the bar is not stuck can it be started continuously.
The pipe dredger is a tool used to clean and dredge the sewer. There are steel wire type and pneumatic type. It is an indispensable tool in modern family life. When using it, you should pay attention to the power plug and avoid motor maintenance.
Torsion spring (torsion spring) uses the principle of leverage to twist or rotate the elastic material with soft material and high toughness to make it have great mechanical energy. It is a spring that withstands torsional deformation, and its working part is also the coil either close together or separately.
The end structure of the torsion spring is processed into various shapes of torsion arms, from single torsion to double torsion, and even the deformation of various torsion bars can be formed according to the design.
Extended information:
The spring deforms under the action of external force. After removing the external force, the spring can return to its state. Many tools and equipment are reset by using the property of spring. For example, the hinges of many building gates are equipped with return springs for people to enter and exit Finally, the door will automatically reset. People also use this function to make automatic umbrellas, automatic pencils and other supplies, which are very convenient. In addition, various buttons and keys are also indispensable for return springs.
Utilize the rebound force (tension) after stretching to work to control the movement of parts, store energy, measure the size of force, etc. It is widely used in machines and instruments. The hooks are in the form of side hook extension springs and long hooks. Extension springs, English hook extension springs, German hook extension springs, semicircular hook extension springs, duckbill hook extension springs, etc. The materials include stainless steel, piano steel, high carbon steel, phosphor bronze, oil tempered alloy spring steel, etc. .
Reference source: Baidu Encyclopedia - Spring
what is a spring
spring
Spring is a mechanical part that uses elasticity to work. It is generally made of spring steel. It is used to control the movement of parts, alleviate shock or vibration, store energy, measure force, etc., and is widely used in machines and instruments. The types of springs are complex and diverse, divided by shape, mainly coil springs, scroll springs, leaf springs, etc.
its main function
Control the movement of machinery, such as valve springs in internal combustion engines, control springs in clutches, etc. Absorb vibration and impact energy, such as buffer springs under automobiles and train carriages, vibration-absorbing springs in couplings, etc. Storage and output Energy is used as power, such as clock springs, springs in firearms, etc. Used as force-measuring elements, such as dynamometers, springs in spring scales, etc. The ratio of spring load to deformation is called spring stiffness, and the greater the stiffness, the spring harder.
According to the nature of the force, the spring can be divided into tension spring, compression spring, torsion spring and bending spring, and can be divided into disc spring, ring spring, plate spring, coil spring, truncated cone scroll spring and torsion bar spring according to the shape. .Ordinary cylindrical springs are the most widely used because they are simple to manufacture and can be made into various types according to the loading conditions. Heat treatment performance, etc., commonly used carbon spring steel, alloy spring steel, stainless spring steel, copper alloy, nickel alloy and rubber, etc. Spring manufacturing methods include cold rolling method and hot rolling method. Spring wire diameter less than 8 mm Generally, the cold rolling method is used, and the hot rolling method is used for those larger than 8 mm. Some springs are also subjected to strong pressure or shot blasting after they are made, which can improve the bearing capacity of the spring.
Spring is a kind of elastic element widely used in mechanical and electronic industries. The spring can produce large elastic deformation when it is loaded, and convert mechanical work or kinetic energy into deformation energy. After unloading, the deformation of the spring disappears and returns to its original shape. The deformation energy is converted into mechanical work or kinetic energy.
Spring class
According to the nature of the force, the spring can be divided into tension spring, compression spring, torsion spring and bending spring; according to the shape, it can be divided into disc spring, ring spring, plate spring, coil spring, truncated cone scroll spring and torsion bar spring, etc. .Ordinary cylindrical springs are the most widely used because they are simple to manufacture and can be made into various types according to the loading conditions. Heat treatment performance, etc., commonly used carbon spring steel, alloy spring steel, stainless spring steel, copper alloy, nickel alloy and rubber, etc. Spring manufacturing methods include cold rolling method and hot rolling method. Spring wire diameter less than 8 mm Generally, the cold rolling method is used, and the hot rolling method is used for those larger than 8 mm. Some springs are also subjected to strong pressure or shot blasting after they are made, which can improve the bearing capacity of the spring.
What is a Coil Spring?
The coil spring is a torsion spring, which is a spring that withstands torsional deformation. Its working part is also tightly wound into a spiral shape. The end structure of the torsion spring is a torsion arm processed into various shapes, not a hook ring. Torsion springs are often used in machinery The balance mechanism in it is widely used in industrial production such as automobiles, machine tools, and electrical appliances.
What is a tension spring?
Tension spring is a helical spring that bears axial tension. Tension springs are generally made of circular cross-section materials. When not under load, the coils of the tension spring are generally tight and there is no gap.
What is a Compression Spring?
The compression spring is a helical spring that bears the pressure. The cross-section of the material used is mostly circular, and it is also made of rectangular and multi-strand steel coils. The spring is generally of equal pitch. The shapes of the compression spring are: cylindrical, conical Shape, convex shape and concave shape and a small amount of non-circular, etc., there is a certain gap between the rings of the compression spring, when the spring is subjected to an external load, the spring shrinks and deforms, and stores deformation energy.
What is a torsion spring? The torsion spring uses the principle of leverage to twist or rotate the elastic material with soft material and high toughness, so that it has great mechanical energy.
What to do if the spring of the pipe dredge machine cannot enter the pipe
The spring of the dredger is used to dredge the sewer. When using it, you must wear gloves, insert the wire head into the drain of the toilet, and insert it with your hands until it does not go in. Only by entering the elbow first so that the spring cannot be returned can it be changed. Good work.
The electric drill type toilet is unblocked. What's the matter if the toilet spring can't get in?
Now the toilet is unclogged, and the spring cannot get in. This may be due to some performance reasons, so it should not be able to get in, so this should have a certain influence.
Principle of seat lift gas spring
The lifting devices used in the lift chairs on the market are divided into 3 categories - oil pressure, mechanical and pneumatic. Most of the low-end lift chairs are pneumatic. There is a cylinder in the pneumatic lift chair, and the piston in the cylinder is pneumatic. The up and down movement of the rod controls the lifting of the chair. Regular manufacturers use nitrogen filling, the concentration is generally above 99%, and the pressure is about one or two atmospheres.
The lifting part has the following characteristics:
When pressing the lift valve switch:
When a person sits on it, that is, puts pressure on the lifting shaft, and the lifting shaft will descend smoothly with a uniform speed and can be lowered to the lowest point.
If no external force is applied to the lifting shaft, the lifting shaft will bounce back to the highest point immediately, and the speed is slightly faster, less than one second.
When not pressing (or releasing halfway through) the valve switch:
The lift shaft remains in its current position, neither compression nor tension can move it relative to the outer sleeve.
First understand the simpler free style gas spring:
The free-style gas spring is relatively simple and consists of three parts: a closed cylinder, a piston in the cylinder, and a piston rod extending outside. The air pressure inside the cylinder is greater than the atmospheric pressure outside, and there are small holes on both sides of the piston inside the cylinder. According to the knowledge of high school physics, if the piston rod is pressed inward, the resistance is constant, which is the difference between the air pressure at both ends of the piston rod.
The self-locking type means that a shaft is added to the piston rod of the free type, and the innermost end of the shaft is connected to a valve. This valve is used to control the communication hole of the piston part. When the valve is pressed down, there is a communication hole, which is equivalent to a free type; When the valve pops up, if there is no communication hole, it will be locked.
Here: the cylinder is our outer sleeve; the piston is our lifting shaft; the shaft inside the piston is our valve button switch.
Therefore, for this kind of chair, the air pressure in the sleeve is basically constant when no one is sitting. Look, as a metaphor, most of the shells of the grenade are relatively strong and have not burst, and the grenade handle is pushed out).
There are several kinds of spring hinges, how to install the spring hinges
Have you heard of spring hinges? I believe that many people will be unfamiliar with this word. But in fact, a spring hinge is a part that connects two items. Spring hinges exist in many places in our lives. How much do you know about spring hinges? Do you know how many types of spring hinges there are? Then, the editor will introduce to you the several types of spring hinges and how to install the spring hinges.
There are several spring hinges
1. Ordinary spring hinge
Ordinary spring hinges are used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.
2. Pipe spring hinge
Pipe spring hinge is also called spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a plate thickness of 16-20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height of the plate up and down, left and right , Thickness. One of its characteristics is that according to the space, the opening angle of the cabinet door. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that various cabinet doors have corresponding extensions. .
3. Door spring hinge
The door spring hinge is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, copper bearing hinges are more used. , because of its beautiful and bright style, moderate price, and equipped with screws.
4. Other spring hinges
Other spring hinges include glass hinges, countertop hinges, and flap hinges. Glass hinges are used to install frameless glass cabinet doors, and the thickness of the glass is required to be no more than 5 to 6 mm.
How to install the spring hinge
The spring hinge supports two states of fully open and fully closed, and it will automatically close in the middle state. If you want the door to reset to closed, after installing the spring hinge, what state will it be opened to by people passing by? It can be automatically reset to the closed state. And it is push-pull bidirectional. The spring hinge is mainly used for cabinet doors and wardrobe doors. It generally requires a plate thickness of 18-20mm. From the material, it can be divided into: galvanized iron, zinc alloy. In terms of performance, it can be divided into two types: holes need to be drilled and holes need not be drilled. No holes are called bridge hinges. Bridge hinges look like a bridge, so they are commonly called bridge hinges. How to install it?
1. Before installation, check whether the hinges match the door and window frames and leaves.
2. Check whether the hinge groove matches the height, width and thickness of the hinge.
3. Check whether the hinge and the screws and fasteners connected to it are matched.
4. The connection method of the hinge should match the material of the frame and leaf, such as the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected to the wooden door leaf is fixed with wood screws.
5. When the two leaf plates of the hinge are asymmetrical, it should be identified which leaf plate should be connected to the fan, which leaf plate should be connected to the door and window frame, and the side connected to the three sections of the shaft should be fixed to the frame , the side connected to the two sections of the shaft should be fixed to the frame.
6. When installing, it should be ensured that the shafts of the hinges on the same leaf are on the same vertical line, so as to prevent the door and window leaves from springing up.
The above is the editor's introduction to several types of spring hinges and how to install spring hinges. What is our installation method for spring hinges? We already have a general understanding of what the characteristics of the spring hinge are, and I hope the above introduction can help everyone.
Expanding upon the topic of the practice of self-closing doors in KFC bathrooms and discussing various methods of invisible door installation:
The practice of having self-closing doors in KFC bathrooms has become a standard feature in many establishments. This ensures that bathroom doors are not left open, improving privacy and maintaining cleanliness. After the renovation process is complete, there are several different methods for installing invisible doors that can be considered. Let's explore these options in more detail.
Firstly, regarding the materials used to hide the door, there are a few choices available. One common method is to paste the door with wallpaper, which can seamlessly blend in with the surrounding walls and make the door less noticeable. Another option is to use plasterboard, which can be painted or textured to match the surrounding décor. Alternatively, wood veneer can be applied to the door, giving it a natural and elegant look.
When it comes to the way the door closes, there are several mechanisms that can be utilized. One popular choice is a door closer, which is a hydraulic device that controls the door's closing speed and ensures that it self-closes after being opened. Another option is a hydraulic hinge, which provides a smoother closing motion and reduces the risk of slamming. Additionally, a touch bead can be used, which is a small, discreet magnetic device that allows the door to close silently and automatically.
In terms of installation methods, there are various options to consider. One possibility is a horizontal opening door, which swings open like a traditional hinged door. Another choice is a sliding door, which can be concealed within the wall or operated on a track system. Lastly, a revolving door can also be used, which adds a stylish and efficient touch to the bathroom entrance.
Moving on to the topic of cabinet doors, there may be instances where the cabinet door closes automatically after being opened, even when the hinge is installed obliquely. This can be attributed to a few reasons. Firstly, if the cabinet body is not perfectly vertical and has a slight inclination towards the direction of closing the door, gravity will naturally cause the door to slowly close. Secondly, the use of self-closing door hinges with buffer damping contributes to the automatic closing effect. These hinges have an elastic force that keeps the door closing slowly when it reaches a certain angle. This feature not only prevents damage to the door from forceful closing but also ensures the safety of individuals by avoiding accidents caused by fast-closing doors. Additionally, the inward closing force provided by these hinges helps maintain the door's stability and prevents it from opening and closing freely.
In mechanics, the principle of moment of force about the axis can be applied to explain the automatic closing of cabinet doors. When the cabinet door is opened, there is a certain force acting on the door hinge axis, creating a moment of force. This moment of force, along with the influence of gravity and the elasticity of the self-closing door hinge, results in the automatic closing of the door.
In conclusion, there are numerous methods available for installing invisible doors in KFC bathrooms. From the materials used to hide the door to the mechanisms for closing it, and the various installation methods, there are several options to consider based on individual preferences and requirements. Additionally, the automatic closing of cabinet doors can be explained using the principle of moment of force about the axis in mechanics. By understanding these concepts, one can make informed decisions when it comes to the design and installation of invisible doors.
Welcome to our expanded article on "What is the difference between a gas spring and a mechanical spring?" If you are intrigued by the working mechanisms behind springs and want to delve deeper into understanding the contrasting functionalities of gas springs and mechanical springs, you have come to the right place. By exploring this article, you will gain invaluable insights into the fundamental dissimilarities between these two types of springs, allowing you to make informed decisions regarding their applications. Let us navigate through the intricacies together and shed light on the fascinating world of springs.
What is a Gas Spring?
Gas springs, also known as gas struts or gas shocks, are mechanical devices that use compressed gas contained within a cylinder to apply force and provide linear motion. They are commonly used in various applications where controlled lifting, lowering, or damping is required.
Gas springs consist of a piston rod, a cylinder, and a gas charge. When the piston rod is extended or compressed, the gas charge within the cylinder exerts pressure, creating a force that can support or counteract external loads. This force is generated by the compressed gas, typically nitrogen, which is chosen for its stability, non-corrosive properties, and wide temperature range.
Mechanical Springs: A Traditional Approach
On the other hand, mechanical springs are springs that rely on mechanical deformation to store and release energy. They are made of elastic materials such as steel or alloys and operate based on Hooke's law, which states that the force exerted by a spring is directly proportional to the displacement of its end.
Mechanical springs come in various forms, including coil springs, leaf springs, and torsion springs, each designed for specific applications. They store potential energy when compressed and release it when the applied force is removed or reduced.
Five Key Differences Between Gas Springs and Mechanical Springs
1. Damping Characteristics
Gas springs offer adjustable damping, allowing for controlled speed and motion throughout the entire stroke. This adjustability makes them suitable for applications requiring smooth and controlled movement, such as vehicle hoods or ergonomic chairs. In contrast, mechanical springs have fixed damping characteristics, making them unsuitable for applications that demand precise control over movement.
2. Length and Force Adjustability
Gas springs offer the advantage of length and force adjustability, as the gas charge can be easily modified to achieve the desired characteristics. The extension or compression force can be adjusted within a wide range, making them highly versatile. Mechanical springs, in contrast, require physical modification or selection of different spring variants to achieve desired force characteristics.
3. Space and Weight Considerations
Gas springs are generally more compact and lighter in weight compared to mechanical springs with similar load-bearing capabilities. This makes gas springs ideal for applications where space and weight constraints are critical, such as in automotive or aerospace industries. Mechanical springs, due to their bulkier nature, may not be suitable when weight or space is limited.
4. Durability and Lifespan
Gas springs have a longer lifespan compared to mechanical springs. Mechanical springs are susceptible to fatigue and wear and tear over time due to repeated stress and deformation. Gas springs, on the other hand, are more resistant to fatigue as they rely on gas compression rather than mechanical deformation.
5. Safety Features
Gas springs offer safety features such as end-of-stroke damping and built-in overload protection. These features prevent sudden or excessive movements, ensuring user safety and protecting equipment from damage. Mechanical springs, lacking such safety features, may pose a higher risk of sudden release or failure under extreme conditions.
In conclusion, gas springs and mechanical springs have distinct differences in terms of damping characteristics, adjustability, space considerations, durability, and safety features. When choosing between the two, it is vital to evaluate the specific requirements of the application, considering factors such as precision control, space limitations, weight restrictions, and safety considerations.
At Tallsen, we offer high-quality gas springs that ensure reliable and efficient performance, catering to a wide range of industry needs. Our gas springs are designed with precision and durability in mind, providing adjustable damping, length, and force characteristics, as well as built-in safety features. With our comprehensive range of gas spring solutions, you can confidently choose the right option for your specific application.
In conclusion, understanding the differences between a gas spring and a mechanical spring is crucial in various industries where these components are widely used. From a structural standpoint, gas springs offer a higher force-to-weight ratio, allowing for more efficient operation and reduced wear and tear. Additionally, their adjustable nature enables precise control over damping, making them ideal for applications requiring smooth and controlled movements.
On the other hand, mechanical springs provide a simpler and more cost-effective solution for lighter loads and applications that do not require fine-tuned control. By considering factors such as load capacity, operating environment, and desired functionalities, engineers and designers can make informed decisions when selecting the appropriate spring type for their specific needs.
Ultimately, both gas springs and mechanical springs play vital roles in various industries, offering distinct benefits and enabling the smooth functioning of countless mechanical systems. It is essential to choose the right type of spring based on the specific requirements of your application to ensure optimal performance and longevity.
what does spring mean
Spring is a mechanical part that uses elasticity to work. Parts made of elastic materials are deformed under the action of external force, and then return to their original shape after removing the external force. It is also called "spring". It is generally made of spring steel. The types of springs are complex Various, according to the shape, there are mainly coil springs, scroll springs, leaf springs, special-shaped springs, etc.
Spring hinge installation method What are the spring hinge brands?
What is a spring hinge
The spring hinge is a hinge that can automatically close the door after it is opened. It is equipped with a spring and an adjusting screw, which can adjust the height and thickness of the plate up and down, left and right. The single spring hinge can only be opened in one direction, and the double spring hinge can be opened in and out. Two-way opening, mainly used on the gate of public buildings.
There are several spring hinges
Types of spring hingesordinary spring hinges
Ordinary spring hinges are used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.
Types of Spring HingesPipe Spring Hinges
The pipe spring hinge is also called a spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a thickness of 16-20mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height of the panel up and down, left and right, Thickness. One of its characteristics is that it can match the opening angle of the cabinet door according to the space. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that various cabinet doors can be stretched accordingly. Spend.
Types of spring hingesdoor spring hinges
The door spring hinge is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, copper bearing hinges are more used. , because of its beautiful and bright style, moderate price, and equipped with screws.
Types of spring hingesother spring hinges
Other spring hinges include glass hinges, countertop hinges, and flap hinges. Glass hinges are used to install frameless glass cabinet doors, and the glass thickness is required to be no more than 5-6 mm.
Spring hinge installation method
The installation process of the spring hinge is relatively simple. After preparing the tools, measure the position and position, and fix the hinge to complete the installation. Netizens can also install it at home
1. Preparation tools
Prepare special installation tools before installation, such as tape measure/level for measuring, carpenters pencil for line drawing and positioning, woodworking hole saw/pistol drill for opening holes, screwdriver for fixing, etc.
2. Line drawing positioning
First use the installation measuring board or woodworking pencil to mark the position (the drilling edge distance is generally 5 mm), and then use a pistol drill or woodworking hole opener to drill a 35 mm hinge cup installation hole on the door panel, and the The drilling depth is generally 12 mm. ;
3. Fixed hinge cup (hinge product)
Insert the hinge into the hinge cup hole on the door panel and fix the hinge cup with self-tapping screws;
4. Fixed base
After the hinge is inserted into the cup hole of the door panel, the hinge is opened, then inserted and aligned with the side panel, and the base is fixed with self-tapping screws;
5. Debugging effects
The last step is to open and close the cabinet door to test the effect.
Ordinary hinges can be adjusted in six directions, aligned up and down, and the left and right of the two doors are moderate. The best effect is to debug the cabinet door. After the door is installed, the gap is generally 2mm.
hey-hey
only one answer
The triangular piece that catches the spring is worn out, replace it
At the beginning, the strength of the hand pressure is very small, and gradually, you must press hard or the range of the pressure hand is too large, that is, the triangular piece is worn out
what does the spring do
A spring is an elastic element that works through its own large elastic deformation. It is widely used in various machines. Its main functions are:
1. Control the movement of machinery, such as the springs that control the opening and closing of cylinder valves in internal combustion engines, and the control springs in clutches;
2. Absorb vibration and impact energy, such as damping springs in various vehicles and springs of various buffers, etc.;
3. Store and release energy, such as clock springs, bolt springs, etc.;
4. Measure the size of the force, such as the spring in the spring balance and the dynamometer, etc.
Spring is a mechanical part that uses elasticity to work. Parts made of elastic materials are deformed under the action of external force, and then return to their original shape after removing the external force. It is also called "spring". It is generally made of spring steel. The types of springs are complex Various, according to the shape, there are mainly coil springs, scroll springs, leaf springs, special-shaped springs, etc.
What to do if the spring of the unblocker cannot go in
Reverse the dredge, the movement of the thread is the same as the direction of unloading the screw. When turning, it looks like it is moving forward, and the dredge will come out slowly; the machine should be turned on, and stop for a second or two to confirm the spring Only when the bar is not stuck can it be started continuously.
The pipe dredger is a tool used to clean and dredge the sewer. There are steel wire type and pneumatic type. It is an invisible tool in modern family life. When using it, you should pay attention to the power plug and avoid motor maintenance.
Torsion spring (torsion spring) uses the principle of leverage to twist or rotate the elastic material with soft material and high toughness to make it have great mechanical energy. It is a spring that withstands torsional deformation, and its working part is also the coil either close together or separately.
The end structure of the torsion spring is processed into various shapes of torsion arms, from single torsion to double torsion, and even the deformation of various torsion bars can be formed according to the design.
Extended information:
The spring deforms under the action of external force. After removing the external force, the spring can return to its state. Many tools and equipment are reset by using the property of spring. For example, the hinges of many building gates are equipped with return springs for people to enter and exit Finally, the door will automatically reset. People also use this function to make automatic umbrellas, automatic pencils and other supplies, which are very convenient. In addition, various buttons and keys are also indispensable for return springs.
Utilize the rebound force (tension) after stretching to work to control the movement of parts, store energy, measure the size of force, etc. It is widely used in machines and instruments. The hooks are in the form of side hook extension springs and long hooks. Extension springs, English hook extension springs, German hook extension springs, semicircular hook extension springs, duckbill hook extension springs, etc. The materials include stainless steel, piano steel, high carbon steel, phosphor bronze, oil tempered alloy spring steel, etc. .
Reference source: Baidu Encyclopedia - Spring
what is a spring
the spring
Spring is a mechanical part that uses elasticity to work. It is generally made of spring steel. It is used to control the movement of parts, induce shock or vibration, store energy, measure force, etc., and is widely used in machines and instruments. The types of springs are complex and diverse, divided by shape, mainly coil springs, scroll springs, leaf springs, etc.
its main function
Control the movement of machinery, such as valve springs in internal combustion engines, control springs in clutches, etc. Absorb vibration and impact energy, such as buffer springs under automobiles and train carriages, vibration-absorbing springs in couplings, etc. Storage and output Energy is used as power, such as clock springs, springs in firearms, etc. Used as force-measuring elements, such as dynamometers, springs in spring scales, etc. The ratio of spring load to deformation is called spring stiffness, and the greater the stiffness, the spring harder.
According to the nature of the force, the spring can be divided into tension spring, compression spring, torsion spring and bending spring, and can be divided into disc spring, ring spring, plate spring, coil spring, truncated cone scroll spring and torsion bar spring according to the shape. .Ordinary cylindrical springs are the most widely used because they are simple to manufacture and can be made into various types according to the loading conditions. Heat treatment performance, etc., commonly used carbon spring steel, alloy spring steel, stainless spring steel, copper alloy, nickel alloy and rubber, etc. Spring manufacturing methods include cold rolling method and hot rolling method. Spring wire diameter less than 8 mm Generally, the cold rolling method is used, and the hot rolling method is used for those larger than 8 mm. Some springs are also subject to strong pressure or shot blasting after they are made, which can improve the bearing capacity of the spring.
Spring is a kind of elastic element widely used in mechanical and electronic industries. The spring can produce large elastic deformation when it is loaded, and convert mechanical work or kinetic energy into deformation energy. After unloading, the deformation of the spring disappears and returns to its original shape. The deformation energy is converted into mechanical work or kinetic energy.
Spring class
According to the nature of the force, the spring can be divided into tension spring, compression spring, torsion spring and bending spring; according to the shape, it can be divided into disc spring, ring spring, plate spring, coil spring, truncated cone scroll spring and torsion bar spring, etc. .Ordinary cylindrical springs are the most widely used because they are simple to manufacture and can be made into various types according to the loading conditions. Heat treatment performance, etc., commonly used carbon spring steel, alloy spring steel, stainless spring steel, copper alloy, nickel alloy and rubber, etc. Spring manufacturing methods include cold rolling method and hot rolling method. Spring wire diameter less than 8 mm Generally, the cold rolling method is used, and the hot rolling method is used for those larger than 8 mm. Some springs are also subject to strong pressure or shot blasting after they are made, which can improve the bearing capacity of the spring.
What is a Coil Spring?
The coil spring is a torsion spring, which is a spring that withstands torsional deformation. Its working part is also tightly wound into a spiral shape. The end structure of the torsion spring is a torsion arm processed into various shapes, not a hook ring. Torsion springs are often used in machinery The balance mechanism in it is widely used in industrial production such as automobiles, machine tools, and electrical appliances.
What is a tension spring?
Tension spring is a helical spring that bears axial tension. Tension springs are generally made of circular cross-section materials. When not under load, the coils of the tension spring are generally tight and there is no gap.
What is a Compression Spring?
The compression spring is a helical spring that bears the pressure. The cross-section of the material used is mostly circular, and it is also made of rectangular and multi-strand steel coils. The spring is generally of equal pitch. The shapes of the compression spring are: cylindrical, conical Shape, convex shape and concave shape and a small amount of non-circular, etc., there is a certain gap between the rings of the compression spring, when the spring is subjected to an external load, the spring shrinks and deforms, and stores deformation energy.
What is a torsion spring? The torsion spring uses the principle of leverage to twist or rotate the elastic material with soft material and high toughness, so that it has great mechanical energy.
What to do if the spring of the pipe dredge machine cannot enter the pipe
The spring of the dredger is used to dredge the sewer. When using it, you must wear gloves, insert the wire head into the drain of the toilet, and insert it with your hands until it does not go in. Only by entering the elbow first so that the spring cannot be returned can it be changed. Good work.
The electric drill type toilet is unblocked. What's the matter if the toilet spring can't get in?
Now the toilet is unclogged, and the spring cannot get in. This may be due to some performance reasons, so it should not be able to get in, so this should have a certain influence.
Principle of seat lift gas spring
The lifting devices used in the lift chairs on the market are divided into 3 categories - oil pressure, mechanical and pneumatic. Most of the low-end lift chairs are pneumatic. There is a cylinder in the pneumatic lift chair, and the piston in the cylinder is pneumatic. The up and down movement of the rod controls the lifting of the chair. Regular manufacturers use nitrogen filling, the concentration is generally above 99%, and the pressure is about one or two atmospheres.
The lifting part has the following characteristics:
When pressing the lift valve switch:
When a person sits on it, that is, puts pressure on the lifting shaft, and the lifting shaft will descend smoothly with a uniform speed and can be lowered to the lowest point.
If no external force is applied to the lifting shaft, the lifting shaft will bounce back to the highest point immediately, and the speed is slightly faster, less than one second.
When not pressing (or releasing halfway through) the valve switch:
The lift shaft remains in its current position, neither compression nor tension can move it relative to the outer sleeve.
First understand the simpler free style gas spring:
The free-style gas spring is relatively simple and consists of three parts: a closed cylinder, a piston in the cylinder, and a piston rod extending outside. The air pressure inside the cylinder is greater than the atmospheric pressure outside, and there are small holes on both sides of the piston inside the cylinder. According to the knowledge of high school physics, if the piston rod is pressed inward, the resistance is constant, which is the difference between the air pressure at both ends of the piston rod.
The self-locking type means that a shaft is added to the piston rod of the free type, and the innermost end of the shaft is connected to a valve. This valve is used to control the communication hole of the piston part. When the valve is pressed down, there is a communication hole, which is equivalent to a free type; when the valve pops up, if there is no communication hole, it will be locked.
Here: the cylinder is our outer sleeve; the piston is our lifting shaft; the shaft inside the piston is our valve button switch.
Therefore, for this kind of chair, the air pressure in the sleeve is basically constant when no one is sitting. Look, as a metaphor, most of the shells of the grenade are relatively strong and have not burst, and the grenade handle is pushed out).
There are several kinds of spring hinges, how to install the spring hinges
Have you heard of spring hinges? I believe that many people will be unfamiliar with this word. But in fact, a spring hinge is a part that connects two items. Spring hinges exist in many places in our lives. How much do you know about spring hinges? Do you know how many types of spring hinges there are? Then, the editor will introduce to you the several types of spring hinges and how to install the spring hinges.
There are several spring hinges
1. Ordinary spring hinge
Ordinary spring hinges are used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.
2. Pipe spring hinge
Pipe spring hinge is also called spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a plate thickness of 16-20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height of the plate up and down, left and right, Thickness. One of its characteristics is that according to the space, the opening angle of the cabinet door. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that various cabinet doors have corresponding extensions. .
3. Door spring hinge
The door spring hinge is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, copper bearing hinges are more used. , because of its beautiful and bright style, moderate price, and equipped with screws.
4. Other spring hinges
Other spring hinges include glass hinges, countertop hinges, and flap hinges. Glass hinges are used to install frameless glass cabinet doors, and the thickness of the glass is required to be no more than 5 to 6 mm.
How to install the spring hinge
The spring hinge supports two states of fully open and fully closed, and it will automatically close in the middle state. If you want the door to reset to closed, after installing the spring hinge, what state will it be opened to by people passing by? It can be automatically reset to the closed state. And it is push-pull bidirectional. The spring hinge is mainly used for cabinet doors and wardrobe doors. It generally requires a plate thickness of 18-20mm. From the material, it can be divided into: galvanized iron, zinc alloy. In terms of performance, it can be divided into two types: holes need to be drilled and holes need not be drilled. No holes are called bridge hinges. Bridge hinges look like a bridge, so they are commonly called bridge hinges. How to install it?
1. Before installation, check whether the hinges match the door and window frames and leaves.
2. Check whether the hinge groove matches the height, width and thickness of the hinge.
3. Check whether the hinge and the screws and fasteners connected to it are matched.
4. The connection method of the hinge should match the material of the frame and leaf, such as the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected to the wooden door leaf is fixed with wood screws.
5. When the two leaf plates of the hinge are asymmetrical, it should be identified which leaf plate should be connected to the fan, which leaf plate should be connected to the door and window frame, and the side connected to the three sections of the shaft should be fixed to the frame, the side connected to the two sections of the shaft should be fixed to the frame.
6. When installing, it should be ensured that the shafts of the hinges on the same leaf are on the same vertical line, so as to prevent the door and window leaves from springing up.
The above is the editor's introduction to several types of spring hinges and how to install spring hinges. What is our installation method for spring hinges? We already have a general understanding of what the characteristics of the spring hinge are, and I hope the above introduction can help everyone.
We have been upholding the goal of being one of the leading manufacturers.We have been developing ourselves much in the international market.Tallsen is dedicated to the business of which contributes greatly to the sales every year.
Tallsen is highly recognized by our customers for passing several certifications at home and abroad.
Change market and language