The difference between casement hinges and mother-child hinges Five differences between mother-child hinges and flat hinges

A hinge is a metal material that connects two parts of an object and enables it to move. It is often used for the installation of doors, windows, and cabinet doors. It is the iron sheet that fixes the door in our home. The hinges of doors on the market generally have Two types: casement hinge and mother-to-child hinge. So in terms of aesthetics and installation convenience, which is better, casement hinge or mother-to-child hinge? What is the difference between the two? Let the editor tell you Talk about the difference between the flat hinge and the mother-child hinge. I hope you can use it as a reference when purchasing.

The five major differences between mother-child hinges and flat hinges

strong aesthetics

Judging from the design of the mother-child hinge, it still has a certain difference from the casement hinge. It does not use a slotted design, which can relatively reduce damage to the door and greatly improve the overall aesthetics. It is now a home Ideal hardware use in life, widely used.

the
good applicability

There is still an obvious difference between the mother-child hinge and the casement hinge, which has been greatly improved in design, so that the use of the hinge itself is better. The mother-child hinge takes into account the load-bearing capacity of the door, so that The slotted design increases the integrity of the door and makes its own scope of application wider, which is in line with the applicability of different doors and has a wide range of applications.

the
Good simplicity

The design of the mother-child hinge takes into account the actual decoration needs, and compared with the casement hinge, it also has a good guarantee in terms of simplicity. The mother-child hinge itself is designed taking into account the needs of convenient installation. In actual processing It is relatively easy and has become a widely used hardware product.

the
strong design

The overall design of the mother-child hinge is stronger than that of the casement hinge, and it also pays more attention to practicality and firmness in the overall appearance design. As a commonly used hardware now, the mother-child hinge is the most important part of the connection and installation of doors and windows. The practical effect is obvious, and the installation position can be determined according to the size of the door gap without damaging the overall appearance.

the
poor durability

However, compared with the casement hinge, the mother-child hinge has many advantages, but it also has its own disadvantages, that is, poor durability. The length of the mother-child hinge itself is the same as that of ordinary hinges, but its inside and outside The design connection is not as good as the casement hinge, so the durability is poor. The casement hinge uses four middle rings, while the mother and child hinge has only two, so the performance is slightly inferior.

After reading the introduction of the editor, I believe that everyone has a general understanding of the advantages and disadvantages of the casement hinge and the parent-child hinge. It looks beautiful; although the swing hinge is troublesome to install, it is durable, and it has relatively high technical requirements. You can choose the appropriate hinge according to the situation of your own door. Finally, the editor reminds everyone to choose the swing hinge The page must match the height and width of the slot.

What are the special functions of mother-child hinges and ordinary flat hinges?

When the hinges of the mother and child are closed, they are single-sided thickness, and the closed double-layer thickness of the flat opening. The difference is that when installed on the door, the hinges of the mother and child do not need to be slotted, and they can be directly nailed to the door. For the side-opening door, a groove should be made on the side of the door, and one side of the hinge should be embedded in the groove. This is the difference. The advantage of the mother-in-law is that it is easy to install. The disadvantage is that the bearing capacity is not as good as that of the side-opening door. The advantage of the side-opening is that Good bearing capacity, after all, the force on both sides of the trench is even. Generally, three pieces are installed for the mother and child, and two pieces that are opened flat are enough.

In terms of the convenience of use and the adaptability to the door, the mother-in-law hinge undoubtedly has the absolute upper hand. Its biggest selling point is its ease of use, because it does not require slotting compared with the installation of the flat hinge, which directly reduces the number of doors facing. The damage of the door greatly enhances the beauty of the door. More importantly, some non-solid wood doors (composite materials) or hollow wooden doors can't bear the slotting at all, and they are barely slotted to install the side-opening type. After a period of time, There may be serious quality problems such as door leaf falling off and door leaf perforation, but the unique design of the factor mother hinge can be installed directly without slotting, which enhances the integrity of the door and greatly enhances the applicability of the hinge to various types of inner doors.

In terms of durability, the casement hinge is better, because the length of the mother and child hinges is the same as that of the ordinary hinge, but the inner and outer pieces of the mother and mother hinges should be overlapped, so that The inner page shrinks, while the outer page is hollowed out. From this point of view, the durability is definitely not as good as the casement hinge with two complete pages. In addition, the rotation and load-bearing often depend on the middle ring, and the wear resistance of the middle ring The degree of closure and the degree of closure of the central axis directly determine the load bearing. The casement hinge usually has 4 middle rings, and the mother and child have two rings. From this point of view, the durability of the mother and child hinge is worse than that of the casement hinge. reason.

Is it better to use a mother-child hinge or a normal hinge?

Mother-child hinges are better than ordinary hinges

The mother-child hinge is a hinge installed on the interior door. The mother-child hinge is an image title. The reason why it was so called at that time was because of the special structure of the hinge, which consisted of two pieces inside and outside. , like a mother and child, very vivid, so it is called a mother-child hinge.

Ordinary hinges: used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.

In terms of durability, ordinary hinges are better than mother-child hinges, because the length of mother-child hinges is the same as that of ordinary hinges, but the inner and outer pieces of the mother-child hinge must overlap As a result, the inner page is shrunk, while the outer page is hollowed out. From this point of view, the durability is definitely not as good as that of an ordinary hinge with two complete pages. In addition, the rotation and load-bearing of the hinge often depend on the The middle ring, the degree of wear resistance of the middle ring and the degree of closure of the central axis directly determine the load bearing of the hinge. There are usually 4 middle rings in the casement hinge, and there are two mother and child hinges. From this point of view, it is also a mother and child hinge. The reason why the durability is worse than ordinary hinges. From the convenience of use and the adaptability to the door, the mother-child hinge undoubtedly has the absolute upper hand. The biggest selling point of the mother-child hinge is that it is easy to use, because it is relatively The installation of ordinary hinges does not require slotting, which directly reduces the damage to the door and greatly enhances the appearance of the door. More importantly, some non-solid wood doors (composite materials) or hollow wooden doors cannot withstand slotting at all. , a barely slotted loaded

Ordinary hinges, after a period of time, may have serious quality problems such as door leaf falling off and door leaf perforation. However, the unique design of factor mother hinges can be installed directly without slotting, which enhances the integrity of the door and greatly enhances the hinge. Applicability to various types of interior doors.

the

the

The difference between mother and child hinges and ordinary hinges

Difference: When installed on the door, the mother-in-law hinge does not need to be slotted, it can be directly nailed to the door, while the ordinary hinge needs to be placed on the edge of the door.

Side slots place one side of the hinge in the slot.

The advantage of the mother and child hinge is that it is easy to install, but the disadvantage is that the bearing capacity is not as good as that of the flat hinge, and the advantage of the hinge is that it has a good bearing capacity.

The force on both sides of the groove is even. Generally, three pieces are installed for the mother and child, and two pieces for ordinary hinges are enough.

Ordinary hinge

Used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. Ordinary hinges do not have the function of spring hinges.

After installing the hinge, you must install all kinds of touch beads, otherwise the wind will blow the door panel.

Mother and Child Hinge

It is a kind of hinge installed on the interior door. The mother-child hinge is a kind of image title. The reason why it was called so at that time was because of this

The special structure of this kind of hinge is composed of two pieces inside and outside, just like a mother and a child. It is very vivid, so it is called a mother-child hinge.

Advantages and Disadvantages

1. In terms of durability, casement hinges are better than mother-child hinges, because the length of mother-child hinges is the same as that of ordinary hinges

Yes, but the inner piece and the outer piece of the factor mother hinge should achieve the effect of overlapping, so that the inner piece page is reduced, and the outer piece is hollowed out.

2. From this point of view, the durability is definitely not as good as the casement hinge with two complete pages, and the rotation and load-bearing of the hinge are a lot

The time depends on the middle ring. The degree of wear resistance of the middle ring and the degree of closure of the central shaft directly determine the load bearing of the hinge.

There are 4 middle rings, and there are two mother and child hinges. From this point of view, it is also the reason why the durability of the mother and child hinges is worse than that of the casement hinges.

3. In terms of the convenience of use and the adaptability to the door, the mother-child hinge undoubtedly has the absolute upper hand. The biggest selling point of the mother-child hinge

It is easy to use, because it does not need to be slotted compared with the installation of the flat hinge, which directly reduces the damage to the door and greatly enhances the

The beauty of the door.

4. More importantly, some non-solid wood doors (composite materials) or hollow wooden doors cannot withstand slotting at all, and they are barely opened.

Slot-mounted hinges, after a period of time, there may be serious quality problems such as door leaf falling off, door leaf perforation, etc.

The unique design of the hinge can be directly installed without slotting, which enhances the integrity of the door and greatly enhances the hinge for various types of inner doors.

applicability.

Points for attention when installing the hinge

1. Before installation, check whether the hinges match the door and window frames and leaves.

2. Check whether the hinge groove matches the height, width and thickness of the hinge.

3. Check whether the hinge and the screws and fasteners connected to it are matched.

4. The connection method of the hinge should match the material of the frame and fan. For example, the hinge used for the steel frame wooden door, the side connected to the steel frame is welded.

The side connected with the wooden door leaf is fixed with wood screws.

5. When the two leaf plates of the hinge are asymmetrical, it should be identified which leaf plate should be connected to the fan and which leaf plate should be connected to the door and window frame.

The side connected to the three sections of the shaft should be fixed to the frame, and the side connected to the two sections of the shaft should be fixed to the doors and windows. When installing, ensure that the same

The shafts of the hinges on one leaf are on the same vertical line to prevent the door and window leaves from springing up.

Which one is better for mother-child hinges and flat hinges?

It is better to open the hinges sideways, and the letters are reversed, so you can read them up and down.

There are holes on both the child leaf and the mother leaf, and the door leaf and the door frame can be fixed by installing screws and achieve normal opening and closing. The mother and child hinges are suitable for installation in the center, depth and edge of the door frame.

There is no need to remove the fixed hinge (slot) of the door leaf like the casement hinge. The size of the gap between the door frame and the door leaf is reasonable, and the overall aesthetic effect is not damaged. The installation is quick and convenient. The price of the mother and child hinge is only 3 of the ordinary hinge. /5, because of the above characteristics, it is more and more favored by consumers.

Advantages and disadvantages of mother and child hinges:

In terms of the convenience of use and the adaptability to the door, the mother-child hinge undoubtedly has the absolute upper hand. The biggest selling point of the mother-child hinge is its ease of use, because it does not require slotting compared with the installation of the casement hinge. It directly reduces the damage to the door and greatly enhances the beauty of the door.

Nowadays, some non-solid wood doors (composite materials) or hollow wooden doors cannot withstand slotting at all, and they are barely slotted to install flat hinges. After a period of time, serious quality problems such as door leaf falling off and door leaf perforation may occur. The unique design of the factor mother hinge can be directly installed without slotting, which enhances the integrity of the door and greatly enhances the applicability of the hinge to various types of inner doors.

Refer to the above content: parent-child hinge

What is the difference between mother-child hinge and flat hinge? What is the difference between mother-child hinge and flat hinge?

In fact, when it comes to mother-child hinges and flat-opening hinges, many people don't know what these two products are, because people really rarely come into contact with mother-child hinges and flat-opening hinges in their lives. The product is actually a tool installed on the interior door to help the door open and close. The decoration master will install the mother-in-law hinge and the flat hinge during the installation of the interior door. You don't need to care about this project, but you can Learn about these two hinges, and today we will introduce them to you.

What is a mother-child hinge

The image of the mother-child hinge is a hinge installed on the interior door. It includes the hinge piece and the hinge shaft. Its main feature is that the hinge piece is divided into a child hinge and a mother hinge. Both the hinge and the mother hinge are installed on the hinge shaft and form a hinge connection. Both the child hinge and the mother hinge can rotate freely around the hinge axis, and the leaves of the child hinge and the mother hinge are on the hinge. If the axes are in the same tangential direction, the child hinge and the mother hinge have holes, and the door leaf and the door frame can be fixed by installing screws and achieve normal opening and closing. The mother and child hinges are centered in the door frame. Both depth and edge are suitable for installation. It is not necessary to remove the fixed hinge (slot) of the door leaf like the casement hinge. The size of the gap between the door frame and the door leaf is reasonable, and the overall aesthetic effect is not damaged. The installation is quick and convenient. The price is only 3/5 of the ordinary hinge, because of the above characteristics, it is more and more favored by consumers.

The difference between mother and child hinges and flat hinges

When the hinges of the mother and child are closed, they are single-sided thickness, and the closed double-layer thickness of the flat opening. For the side-opening door, a groove should be made on the side of the door and one side of the hinge should be inserted into the groove. The bearing capacity is good, after all, the force on both sides of the groove is even. Generally, three pieces are installed for the mother and child, and two pieces for the flat opening are enough.

the
Which is better, the mother-in-law hinge and the flat hinge?

In fact, we can already see from the above introduction that if you need a hinge with better bearing capacity, you can choose a flat hinge. If you like a hinge that is easier to install, you can choose a mother hinge.

In the above, we have introduced some information about mother-child hinges and open hinges. In this article, we mainly focus on the topic of who is better about mother-child hinges and open hinges. Yes, you can see that we have divided the content of the mother-child hinge and the flat-opening hinge into three parts to explain to you. First, we introduce the difference between the mother-child hinge and the flat-opening hinge. Which one is better, the female hinge and the flat hinge, you can find out.

What is the best material for the door hinge

• 
  stainless steel or brass
  

• 
  1. The hinge material generally has three materials: stainless steel, pure copper and iron. If it is installed at home, it is recommended that you choose 304 stainless steel, because the cost of pure copper is relatively high, and iron is easy to rust , compared with stainless steel hinges, it is both practical and cost-effective.
  
  2. Regarding how to choose the color of the hinges, electroplating technology is generally used now, and stainless steel materials will also have a variety of color options. We can choose the appropriate hinge color according to the different styles of doors and windows of our houses.
  
  3. There are two types of door hinges on the market: side hinges and mother-to-child hinges. The side hinges are what we call standard hinges. They generally require manual slotting during installation. It is recommended You can choose this kind of door, which is more practical and worry-free; the mother and child hinges are less stressed, and are suitable for relatively light PVC doors or hollow doors.
  

The difference between casement hinges and mother-child hinges Key points for installation of casement hinges

Casement hinges and mother-to-child hinges are two representative products of the hinge, so what is the difference between casement hinges and mother-to-child hinges? Which one is more reliable for mother-to-child hinges and flat hinges? What? Today, in addition to comparing and analyzing these two aspects of knowledge for you, we also give you the installation operation and precautions of the swing hinge. From the beginning, you can know that a suitable and reasonable swing hinge may be more durable. However, the mother-child hinge is easy to install, and its aesthetic performance is even better. However, both of them can serve the purpose of connection and consolidation. You can learn from the following comprehensively. What we will explain to you is the basic popularization information of these aspects. I believe the key Sometimes it can come in handy.

the
1. The difference between the casement hinge and the mother-child hinge

When the hinges of the mother and child are closed, they are single-sided thickness, and the closed double-layer thickness of the flat opening. The difference is that when installed on the door, the hinges of the mother and child do not need to be slotted, and they can be directly nailed to the door. For the side-opening door, a groove should be made on the side of the door, and one side of the hinge should be embedded in the groove. This is the difference. The advantage of the mother-in-law is that it is easy to install. The disadvantage is that the bearing capacity is not as good as that of the side-opening door. The advantage of the side-opening is that Good bearing capacity, after all, the force on both sides of the trench is even. Generally, three pieces are installed for the mother and child, and two pieces that are opened flat are enough.

the
2. Which one is better for mother-child hinges and flat hinges?

At present, the hinges on the market are mainly divided into two types: casement hinges and mother-in-law hinges. From the perspective of aesthetics and installation convenience, mother-in-law hinges are more convenient to install than side hinges. There is no need to slot on the wooden door, just use It can be installed with screws, and the aesthetics are better.

But in terms of durability, the casement hinge is more durable than the mother-to-child hinge. When the casement hinge is installed, it needs to slot the door leaf fixed hinge, and the hinge is embedded in the groove. The overall bearing capacity of the hinge is The force is better than the mother-in-law hinge, and it is relatively more durable after a long time of use.

It should be noted that the swing hinge has relatively high requirements on the material of the door and the technical level of the installation workers. If the door purchased by the owner is hollow, the swing hinge cannot be used because the door cannot be slotted. At the same time, workers are required to Be sure to pay more attention when slotting to avoid damaging the wooden door. In terms of purchase price, the flat hinge is slightly more expensive than the mother and child hinge, but the price difference between the two is not very big.

the
3. Key points for installation of casement hinges

(1) Before installation, check whether the hinges match the door and window frames and leaves.

(2) Check whether the hinge groove matches the height, width and thickness of the hinge.

(3) It should be checked whether the hinges are compatible with the screws and fasteners connected to them.

(4) The connection method of the hinge should match the material of the frame and leaf. For example, the hinge used for the steel frame wooden door, the side connected to the steel frame is welded, and the side connected to the wooden door leaf is fixed with wood screws.

(5) When the two leaf plates of the hinge are asymmetrical, it should be identified which leaf plate should be connected to the fan, which leaf plate should be connected to the door and window frame, and the side connected to the three sections of the shaft should be connected to the frame. Fixed, the side connected with the two sections of the shaft should be fixed with the doors and windows.

(6) When installing, it should be ensured that the axes of the hinges on the same leaf are on the same vertical line, so as to prevent the door and window leaves from springing up.

What I recommend for you today is the description of two well-known and representative hinge products, including the respective advantages of the casement hinge and the parent-child hinge, as well as the selection precautions. The ability or the appearance is not the same, or the complexity of the steps in the decoration operation process is not the same. If you want to look at it from the perspective of firmness, reliability, and convenience, the flat hinge may be better, and it has beautiful performance, convenient operation, and long service life. It is also quite good, and is more suitable for the choice of modern and simple decoration style. For details, you can refer to the above to understand. What we will explain to you is the difference between the two and the purchase precautions.

The difference between mother-child hinges and flat hinges Which one is better for mother-child hinges and flat hinges

Mother-child hinge.

1. The beauty and installation convenience are different: the mother-in-law hinge is more convenient to install than the flat hinge. It does not need to slot on the wooden door, but only needs to be installed with screws, and the aesthetics is better.

2. The durability is different: the casement hinge is more durable than the parent-child hinge. When the casement hinge is installed, it needs to slot the door leaf fixed hinge, and the hinge is embedded in the groove. The overall bearing capacity of the hinge It is better than mother-in-law hinges, and it is relatively more durable after a long time of use.

Precautions for the use of mother and child hinges

It should be noted that unlike ordinary hinges, the mother-child hinge is not two plates of the same size, but looks like a pair of mother and child, consisting of a smaller child leaf and a larger mother leaf. The leaf is shaped like a hollowed out part of the mother leaf. Compared with ordinary hinges, the mother and child hinges are thinner and are not suitable for heavier wooden doors.

It should be noted that the core of the hinge is the bearing. The flexibility and durability of the door opening and closing are determined by the bearing. The bearing of the mother and child hinge is lighter than the ordinary hinge. It is better to install three hinges. for better load bearing.

The above content refers to mother-in-law hinges and swing doors

What is the difference between the full cover hinge and the half cover and side cover hinge? What are the hinges?

What are the differences and differences between full-cover hinges, half-cover hinges, and side-opening hinges? What are the types of hinges? What I recommend for you today is the knowledge of these aspects. From this, you can learn, first of all, It can be seen from their structural design that the so-called full cover may be more suitable for some special places, while other hinges are not the same. Another aspect and can also be classified according to the material, which can be classified according to the size and size. The detailed division includes some aluminum alloy steel materials, which are waterproof, moisture-proof and corrosion-resistant, and have a longer service life. There may also be other plastic hinges. They are relatively more cost-effective, and you can learn about them through the following.

the
1. What is the difference between full cover hinges and half cover and side cover hinges?

There are three types of door hinges: 45, 180, and 270. The angle indicates the inner angle after the cabinet is opened.

The full cover, half cover, and inlay of the hinge are determined according to the side panel of the cabinet, and the thickness of the side panel is generally 16-18MM.

Full cover: The door completely covers the side panel of the cabinet, and there is a gap between the two so that the door can be opened safely. Straight arm (0 mm) full cover door Straight arm (0 mm)

Half cover: In this case, two doors share a side panel. There is a minimum total gap required between them. The distance covered by each door is reduced accordingly, requiring the use of door hinges with curved arms. Middle curved (9.5mm) half cover door curved (9.5mm)

Responding door: In this case the door is inside the cabinet, next to the side panel of the cabinet. It also needs a clearance so that the door can be opened safely. Requires a hinge with a very curved hinge arm. Daqu (16mm) semi-recessed Daqu (16mm)

the
the
2. Types of hinges

Ordinary hinges: used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.

Pipe hinge: also called spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a plate thickness of 16-20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height of the plate up and down, left and right, Thickness. One of its characteristics is that it can match the opening angle of the cabinet door according to the space. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that various cabinet doors can be stretched accordingly. Spend.

Door hinge: It is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, copper bearing hinges are mostly used. Because of its beautiful and bright style, moderate price, and equipped with screws.

Bearing hinge (copper): Each leaf shaft of the hinge is equipped with a one-way thrust ball bearing. The door switch is light and flexible, and it is mostly used on heavy-duty doors or special steel frame steel doors.

Inclined release hinge: This kind of hinge makes use of the inclined plane of the hinge and the weight of the door leaf to automatically close the door. It is mainly suitable for lighter wooden doors or half-section doors such as toilets.

The above recommendation is about the comparison between various hinges and the evaluation of the types. From this, we can know that the common hinges include full cover hinges, half cover hinges and side cover hinges. Three There are certain differences in their respective designs. In addition, suitable and reasonable hinges may be waterproof and moisture-proof stainless steel frame materials, or plastic materials. The corresponding cost performance and advantages are not the same. Suitable places There are also big differences. We should combine our actual needs and our respective budgets for reference, so as to achieve satisfactory results and ultimate goals.

What are the types of hinges? What are the common specifications of hinges?

Hinges are widely used in our lives. I believe that everyone is familiar with the material of hinges. Hinges are items that we will inevitably use when opening and closing doors. Whether it is a security door at home or a solid wood door indoors, Hinges are all required to be installed, but different doors use different types of hinges. Many users and friends only have a superficial understanding of hinges, so today we will explain them in detail in this article. Introduces some information about hinges.

What are the types of hinges?

Ordinary hinges. Mainly used for doors and windows. Ordinary hinge specifications: used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After installing the hinge, you must install all kinds of touch beads, otherwise the wind will blow the door panel.

Pipe hinge. It is mainly used for the connection of furniture door panels, also called spring hinge. Pipe hinge specification page: also called spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a plate thickness of 1620mm. The material is galvanized iron , Zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height and thickness of the plate up and down, left and right. One of its characteristics is that it can match the opening angle of the cabinet door according to the space. In addition to the general 90-degree angle, 127-degree, 144-degree , 165 degrees, etc. are matched with corresponding hinges, so that various cabinet doors have corresponding extensions.

Door hinge. It is divided into ordinary type and bearing type. The bearing type is divided into copper and stainless steel. Specifications of door hinge: it is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and copper in terms of material. Quality, stainless steel. Judging from the current consumption situation, more copper bearing hinges are used, because of its beautiful and bright style, moderate price, and equipped with screws.

What are the common specifications of hinges?

There are many types of hinge specifications. The specifications of our commonly used doors and windows are 50.8*30*1, 100*60*1, 63*35*1, 101.6*76.2*2, 88.9*88.9*3, etc. Everyone is choosing when using hinges, pay attention to whether the surface plating of the hinges is fine and smooth, whether the edges of the spring pieces have been polished, and check whether the hinges are relatively light. If they are too heavy, they will not be conductive to rotation. The star-rated hotels are still common residential buildings, and it is difficult for people to see wooden "hukou". Most of the doors and windows of modern buildings use metal door hinges. The modern production of door hinges replaces the ancient "hukou". The ancient invention of "hushu" still remains on some old doors and windows of some ancient buildings and rural residential buildings in Guanzhong.

The above is all the content about the hinge that we introduced to you. In this article, we actually divide the content of the hinge into two parts. First, we introduce the classification of the hinge, because we are in a At the beginning, it was mentioned that different doors may use different hinges, so it is important to know the types of hinges. Then we also analyzed the general specifications of hinges. This part of knowledge is helpful for everyone to buy hinges by themselves. Still a great help.

1. According to the type of base, it can be divided into detachable type and fixed type;

2. According to the type of arm body, it is divided into two types: slide-in type and snap-in type;

3. According to the cover position of the door panel, it is divided into full cover (straight bend, straight arm) with a general cover of 18%, half cover (medium bend, curved arm) with a cover of 9%, and the built -in (large bend, large bend) door panels are all hidden inside.

Hinges are mainly installed on doors and windows, and hinges are more installed on cabinets. According to the classification of materials, they are mainly divided into stainless steel hinges and iron hinges; in order to let people enjoy better, hydraulic hinges (also known as damping hinges) have appeared. Its characteristic is that it brings a buffer function when the cabinet door is closed, which minimizes the noise caused by the collision with the cabinet body when the cabinet door is closed.

Extended information

Notes on hinge use:

1. Wipe gently with a dry soft cloth, do not use chemical cleaners or acidic liquids to clean, if you find black spots on the surface that are difficult to remove, wipe it with a little kerosene;

2. It is a normal phenomenon to make noise after a long time of use. In order to ensure the smooth and quiet pulley for a long time, you can regularly add some lubricating oil for maintenance every 2-3 months.

3. Prevent heavy objects and sharp objects from bumping and scratching.

4. Do not pull or pull hard during transportation, which may damage the hardware at the furniture joints.

Hinge type introduction Classification information description

When it comes to hinges, we all know that it is a basic accessory product, often called a hinge, but the hinges in our impression are generally similar, mainly installed in some cabinet doors and windows or ordinary wood In the door, it can play The role of making it easy for everyone to open and close. But in fact, the hinge can be classified in detail, such as ordinary hinges, pipe hinges or door hinges. In addition to classification according to shape, the field of use The difference in location and location also determines their names. When purchasing, we should refer to the differences between different hinges to understand.

1. Types of hinges

Ordinary hinges: used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.

Pipe hinge: also called spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a plate thickness of 16-20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height of the plate up and down, left and right, Thickness. One of its characteristics is that it can match the opening angle of the cabinet door according to the space. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that various cabinet doors can be stretched accordingly. Spend.

Door hinge: It is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, copper bearing hinges are mostly used. Because of its beautiful and bright style, moderate price, and equipped with screws.

Bearing hinge (copper): Each leaf shaft of the hinge is equipped with a one-way thrust ball bearing. The door switch is light and flexible, and it is mostly used on heavy-duty doors or special steel frame steel doors.

Inclined release hinge: This kind of hinge makes use of the inclined plane of the hinge and the weight of the door leaf to automatically close the door. It is mainly suitable for lighter wooden doors or half-section doors such as toilets.

Cold storage door hinge: the surface is baked, the large size is made of steel plate, and the small size is made of cast iron. It is used for cold storage doors or heavy insulation doors.

Fan-shaped hinge: The thickness of the two sheets of the fan-shaped hinge is about half thinner than that of ordinary hinges, and it is suitable for various doors and windows that need to be rotated to open and close.

Silent hinge: also known as nylon washer hinge, when the door and window are opened and closed, the hinge is silent, and it is mainly used on the doors and windows of public buildings.

Single-flag hinge: The hinge is made of stainless steel, which is rust-resistant and wear-resistant, and easy to disassemble. It is mostly used on double-layer windows.

Window hinge: when installing, the two leaf plates with the mandrel should be installed on both sides of the window frame, and the two leaf plates without the mandrel should be installed on both sides of the window sash. One of the negative plates without the mandrel with a groove must be installed on the The grooved side of the window sash is convenient for loading and unloading of the window sash. It is used on the movable windows of factories, warehouses, houses, public buildings, etc.

Multifunctional hinge: when the opening angle is less than 75, it has the function of automatic closing. When it is at an angle of 75-90, it will be stable by itself, and if it is greater than 95, it will be automatically positioned. This hinge can be installed on the door instead of an ordinary hinge use on.

Anti-theft hinge: for ordinary hinges, when the shaft is pulled out, the door leaf can be removed. Anti-theft hinges can prevent the door leaf from being removed through the self-locking effect of the pins and pin holes on the two leaves of the hinge. It plays an anti-theft role and is suitable for residential doors.

Spring hinge: It can make the door leaf close automatically after opening. The single spring hinge can only be opened in one direction, and the double spring hinge can be opened in both directions. It is mainly used on the gate of public buildings.

Biaxial hinge: There are two kinds of biaxial hinges, left and right, which can make the door leaf open, close and disassemble freely. It is suitable for general door and window leaves.

From the above, we can know that there are many types of hinges, and the classification standards are also different, including starting from the purpose and appearance, or starting from the place and field of use, the types and names of hinges corresponding to different classification standards will also have different types. The difference, such as common door hinges, as the name implies, is used on some large doors to help open and close the hinges, that is, the so-called door hinges, and different classifications of hinges can be further detailed according to size and size. We should understand the parameters in this aspect when we study and refer to, and compare and get suitable and reliable suggestions and solutions.

Hinge Encyclopedia brings you the types of hinges

When you decorate a room, you need to use a lot of decoration materials, and you also need a lot of furniture to decorate the whole room, so that the room looks very beautiful. When you install doors and windows, you need to use a kind of object called a hinge. The lotus leaf is placed on the door and window The installation is very important, because the connection between the door and the door needs to be done with a hinge. There are many types of lotus leaves. When you choose, you may not know which one to choose because there are too many types. The following editor is for Let us introduce the types of hinges in detail!

What are the types of hinges?

List of Hinge TypesOrdinary Hinge

It is used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After installing the hinges, various bumpers must be installed, otherwise the wind will Blow the door.

the
List of Hinge TypesPipe Hinges

It is also called spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a plate thickness of 16-20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height and thickness of the plate up and down, left and right. It One of the characteristics is that it can match the opening angle of the cabinet door according to the space. In addition to the general 90-degree angle, 127-degree, 144-degree, 165-degree, etc. have corresponding hinges to match, so that various cabinet doors have corresponding extensions.

the
List of Hinge Types - Door Hinge

It is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, more copper bearing hinges are used because of their beautiful style. , bright, affordable, and equipped with screws.

the
Hinge specification and size:

Length*Width:

2 inches*1.5-1.8 inches

2.5 inches*1.7 inches

3 inches*2 inches

4 inches * 3 inches

5 inches*3-3.5 inches

6 inches*3.5-4

Note: inch means inch, 1 inch=25.4mm

the
Hinge installation method

The installation of the hinge is very simple, but at the same time, it is also necessary to pay attention to the differences in the style, type, and performance of the mother and child hinges. There are also certain differences in the installation. The built-in mother and child hinge is installed. It is necessary to leave a certain gap so that the door can be opened safely and flexibly. The full cover type mother hinge is installed, and the door is completely covered on the surface of the side panel of the cabinet, so it is necessary to pay attention to the size of the gap between the two. The half cover type mother hinge When installing two doors sharing the same side panel, there is a required small gap between the two, and the coverage distance of each door must be reduced accordingly.

I believe that after reading the introduction above, you should know what types of hinges are there? There are many types of lotus leaves. When choosing hinges, you must choose according to the type of your doors and windows. After installing the hinges, if you When there are some quality problems when using doors and windows, or you need to replace the doors and windows, you can remove the hinges and replace them with new doors and windows, which greatly saves the cost of maintenance and replacement. I hope that the editor's suggestions can help you choose Appropriate hinges can help you better repair doors and windows.

How about hidden hinges? Types of hinges?

What I recommend for everyone today is the evaluation of hidden hinges and the knowledge of hinge types. From this, we can know that, first of all, common hidden hinges are different from ordinary full cover hinges. Their design It is quite special. If it is installed between the cabinet door and the wooden door, it will not be easy to find later. On the other hand, this hidden hinge also means that we can use it when we stand outside the door and install the lock on the left, or the door lock is installed It can also be used on the right side, so this kind of hinge is more in line with the actual characteristics of humanization, and they are easy to install, suitable for invisible doors, and there are many adjustment directions. You can refer to the following for details. We will explain these few for you. Aspects of evaluation and presentation analysis.

the
1. How about the hidden hinge

1. Beautiful hidden device, without any exposed parts, beautiful and generous! 2. Adjustable three-dimensional adjustable, the adjustment direction is up and down, left and right, and bevel adjustment. 3. The durable hidden hinge is made of imported No. 3 zinc , the service life is as long as 30 years! 4. Easy to install. After the factory has opened the hole and installed it, you only need to take the hexagon wrench to the customer and screw it on. 5. Save after-sales costs. When the door sags, the customer can pass the Manually adjust the hinge to adjust the door, which greatly saves the cost of the manufacturer's door after-sales. Real estate forum, decoration forum, owner forum, P3 V9 O- M3 T"

2. Types of hinges

Ordinary hinges: used for cabinet doors, windows, doors, etc. The materials are iron, copper and stainless steel. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After the hinges are installed, various touch beads must be installed. , otherwise the wind will blow the door panel.

Pipe hinge: also called spring hinge. It is mainly used for the connection of furniture door panels. It generally requires a plate thickness of 16-20 mm. The material is galvanized iron and zinc alloy. The spring hinge is equipped with an adjusting screw, which can adjust the height of the plate up and down, left and right, Thickness. One of its characteristics is that it can match the opening angle of the cabinet door according to the space. In addition to the general 90-degree angle, 127 degrees, 144 degrees, 165 degrees, etc. have corresponding hinges to match, so that various cabinet doors can be stretched accordingly. Spend.

Door hinge: It is divided into ordinary type and bearing type. The ordinary type has been mentioned before. The bearing type can be divided into copper and stainless steel in terms of material. From the current consumption situation, copper bearing hinges are mostly used. Because of its beautiful and bright style, moderate price, and equipped with screws.

Bearing hinge (copper): Each leaf shaft of the hinge is equipped with a one-way thrust ball bearing. The door switch is light and flexible, and it is mostly used on heavy-duty doors or special steel frame steel doors.

Inclined release hinge: This kind of hinge makes use of the inclined plane of the hinge and the weight of the door leaf to automatically close the door. It is mainly suitable for lighter wooden doors or half-section doors such as toilets.

The above recommendations are about the characteristics of the hidden hinge and the precautions for installation. From this, we can know that this hidden hinge can be divided into adjustable hidden hinges and non-adjustable hidden lotus leaves, and the product is easy to install. It can be used on invisible doors, and there are a variety of adjustment directions for us to choose from. However, the specific operation effect in the later stage depends on the choice between the hidden door hinge parts. You can continue to understand the above, combined with the actual choice. A hidden spectrum and you can also refer to other classification knowledge of the hinge page for an in-depth understanding.

what is hinge

Hinge definition:

Hinge: also known as hinge. It is composed of a pair of metal leaves (or parts) connected by pivot pins, usually in two folds. It is a device by which two parts of furniture doors, covers or other parts that need to swing are connected and rotated.

Names of countries:

Chinese: hinge; hinge

German: Scharnier

English: Hinge

Spanish: Bisagra

French: Charnire (menuiserie)

Japanese: Butterfly

Classification of hinges:

1. Ordinary hinges: mainly used for cabinet doors, windows, doors, etc. The disadvantage of ordinary hinges is that they do not have the function of spring hinges. After installing the hinges, various bumpers must be installed, otherwise they will swing easily.

2. Special-shaped hinges: Compared with ordinary hinges, special-shaped hinges have the same function as ordinary hinges, but the structure is slightly different from ordinary hinges. It is mainly used in industrial products, such as flag-shaped hinges and spring hinges. types of pages.

The hinge is generally composed of the following accessories: 1. Hinge sheet; 2. Hinge shaft; 3. Hinge bearing (not necessary); 4. Hinge cap.

3. Common specifications of hinges: 2 inches (length 50mm), 2.5 inches (length 65mm), 3 inches (length 75mm), 4 inches (length 100mm), 5 inches (length 125mm), 6 inches (length 150mm).

English hinge cap term explanation:

FT---Flat tip (flat head) BT---Ball tip (ball head)

PT---Pagoda tip (pagoda head) GT---Acorn tip (acorn head)

CT---Crown tip (crown head) ST---Steeple tip (spire head)

(J IE Yang j ing is too hardware fittings factory HTTP://吹吹吹. Only then can it reflect the 1.HTML of .com/scripts/content/knowledge/knowledge Hi

Hinge Type Encyclopedia

The types of hinges include ordinary hinges, pipe hinges, and door hinges.

1. Ordinary hinge

In any era, ordinary represents the public and represents the trend at that time. In terms of doors, windows and furniture, the ordinary type is the most common, and the hinges corresponding to these ordinary furniture are also indispensable. Therefore, the most common type on the market The hinge type is the ordinary type, which does not have the function of a spring hinge.

2. Pipe hinge

This is a kind of spring hinge, which is to add a spring in the middle of the hinge to better control the opening and closing of doors, windows and furniture. It is worth mentioning that this kind of hinge is most commonly used in the connection of furniture door panels. The There are galvanized iron and zinc alloy hinges. The biggest feature is that the height and radian of up, down, left, and right can be adjusted, and the opening angle can even be determined according to the size of the room.

3. Door hinge

This is a highly targeted hinge, mainly used for the connection and rotation of the door leaf and the door frame. This type of hinge is made of copper or stainless steel, and it is also divided into ordinary type and bearing type. And the above mentioned Compared with the two hinges, the door hinge has the largest load-bearing capacity and is durable.

hinge

Hinge is also known as hinge, and its official name is hinge. It is often composed of two folds, which is a part that connects two parts of an object and enables it to move. Ordinary hinges are used for cabinet doors, windows, etc.; the materials are iron and copper. And stainless steel. The pipe hinge is also called a spring hinge; it is mainly used for the connection of furniture door panels, and it generally requires a plate thickness of 16 to 20 mm.